HTC Corporation
.
Doc. Title | Raphael Service Manual |
2.3 Assembling procedure
Issued Date
Revised Date
Page
REV.
2008/7/2
A10
2008/12/01
27 of 98
HTC CONFIDENTIAL
1.REMOVE THE CONDUCTIVE FABRIC
ON THE MAIN CAMERA AT THE LOCATION INDICATED.
2.PASTE A CONDUCTIVE FABRIC
(72H02844-0M) ON THE MAIN
CAMERA AT THE LOCATION INDICATED.
1.CONNECT THE MAIN CAMERA TO SIM FPC AND STICK THE CONDUCTIVE FABRIC ON IT.
1. MAKE SURE THE MYLAR
CONDUCTIVEFABRIC
(72H02843-00M, 76H03122-00M)
WAS ATTAHCED AT THE LOCATION INDICATED.
2.STICK THE SIM FPC TO THE MAIN BOARD AT THE LOCATION INDICATED
NOTE:
A.DO NOT BEND THE SIM FPC
B.DO NOT TOUCH THE DOUBLE SIDED TAPE
C.MAKE SURE THE SHIELDING COVER SURFACE IS CLEAN