RCA RTD260 manual Test Tone, Distance, Night Mode, Front Surround Sound Effect FSsE, Rating

RTD260 EN (07_06_06) 15/6/06 4:34 PM Page 32

The Setup Menu

Audio

You can adapt your player to other equipment and access specific functions with the Audio menu.

	1.	Select Audio in the main menu using the left/right arrow
EN
		buttons.
	2.	Select an option using the up/down arrow buttons and
		press OK.

Test Tone

This function is used to test the speaker setting. A short noise comes from the respective speaker.

Distance

Basic settings have been preset for the speakers included with your unit. However, to suit the acoustic conditions in your listening room and to make the sound more effective, you may need to delay the signal coming from some of the speakers. Channel delay compensates for center or surround speakers

that are closer to the listening position than the front speakers.

1.Highlight a distance option using the up/down arrow buttons.

•Subwoofer (Sub Dist.)

•Rear (SR Dist.)

•Rear (SL Dist.)

•Front (FR Dist.)

•Center (Cen Dist.)

•Front (FL Dist.)

2.Press the left/right arrow buttons to adjust the distance.

Note: The receiver speaker distance default settings are as follows:

Subwoofer (Sub Dist.): 0ft; Rear (SR Dist.): 10ft; Rear (SL Dist.): 10ft; Front (FR Dist.): 15ft; Center (Cen Dist.): 15 ft;

Front (FL Dist.): 15ft.

Night Mode

You can use this function to control the different sound levels via dynamic compression. It improves the quality of the sound track at a low volume, and quiets the loudest sounds. You can choose between Quiet, Moderate or Off.

Note: This function is available only on DVD discs recorded in Dolby Digital.

Front Surround Sound Effect (FSsE)

You can use this function if placing the rear speakers (surround speakers) at the back of the room is not a good choice for you. See page 8-10 for speaker configuration.

You can use this function to control different levels of surround sound. You can select among Small Room, Medium Room, Large Room and OFF according to your room size:

Small Room: room size below 12ft x 12 ft (3.6m x 3.6m)

Medium Room: room size between 12ft x 12ft - 16 ft x 16 ft (5m x 5m)

Large Room: room size over 16ft x 16ft (5m x 5m)

Rating

The disc publisher is responsible for coding scenes according to the rating limits. Below is an explanation of Ratings.

You can control access to the player and the type of discs your family can watch with the lock function. Locking the player prevents playback of DVDs that may not be suitable for all audiences by using the rating level encoded on the disc (not all discs are rated). If the rating level of the disc is higher than the preset level, playback is prohibited unless a password is entered.

28Illustrations contained in this document are for representation only.