Sharp MD-MT20H operation manual Error Messages, Batt Empty

Page 41

ERROR MESSAGES

Error messages

Meaning

Remedy

 

● The battery run down.

● Charge the rechargeable battery or

BATT EMPTY

 

replace the alkaline batteries (or use

 

 

the AC adaptor for power).

BLANK DISC

● Nothing is recorded.

● Replace the disc with a recorded disc.

Can’t COPY

● No copy can be made because of

● Record using the analogue cable.

the SCMS copyright system.

 

 

 

Can’t EDIT

● A track cannot be edited.

● Change the stop position of the track

 

and then try editing it.

 

 

Can’t REC

● Recording cannot be performed cor-

● Re-record or replace it with another

rectly due to vibration or shock in the unit.

recordable disc.

 

Can’t WRITE

● Editing is impossible.

● Check the number of tracks.

 

● The disc is scratched.

● If the sound you hear is not right, try

DEFECT

 

recording again.

 

● Replace the disc with another re-

 

 

 

 

cordable disc.

Din UNLOCK

● Poor connection of the digital cable.

● Connect the digital cable securely.

DISC FULL

● The disc is out of recording space.

● Replace it with another recordable

 

disc.

 

 

HOLD

● The unit is in the hold mode.

● Return the HOLD switch to its origi-

 

nal position.

 

 

LOCKED

● The OPEN lever was moved during

● Turn off the power and remove the

LOCK ERROR

recording or editing.

MiniDisc.

NO DISC

● A disc has not been loaded.

● Load a disc.

PB DISC

● You tried to record on a playback-

● Replace it with a recordable disc.

only disc.

 

 

 

POWER ?

● Improper power is being supplied.

● Use one of the specified power

 

sources.

 

 

PROTECTED

● The MD is write protected.

● Move the write protection knob back

 

to its original position.

 

 

READ ERROR

● The disc is damaged.

● Reload the disc or replace it.

 

 

● Replace it with another recorded disc.

 

● Since a track number is currently

● Wait for a while and try the opera-

SORRY

being located or written to, the unit

tion again.

 

cannot accept your command.

 

SYSTEM ERR

● You have come to the conclusion

● To have it repaired, go to the distribu-

 

that the unit is out of order.

tor where you purchased the unit.

TEMP OVER

● The temperature is too high.

● Turn off the power, and wait for a

 

 

while.

TOC ERROR

● A large portion of the disc has been

● Replace it with another recorded

damaged.

disc.

 

 

● There is no space left for recording

● Replace it with another recordable

TOC FULL

character information (track names,

disc.

 

disc names, etc.).

 

Tr. Protect

● The track has been protected from

● Edit the track with the device on

being erased.

which it was recorded.

 

 

● A large portion of the disc has been

● Replace it with another recorded

U TOC ERROR

damaged.

disc.

● There is an error in the recorded sig-

● Erase all of the signal errors, and

 

nal.

then try recording again.

 

 

 

 

● A disc which contains data other than

● A disc which contains non-music

? DISC

music was played.

data cannot be played.

● There is an error in the signal from

● Replace it with another recorded

 

 

the disc.

disc.

40

* MD-MT20H FOR UK(22-42)

41

99.3.11, 2:30 PM

Image 41
Contents MD-MT20H Special Notes Service InformationMD-MT20H for UK01-21 99.3.11, 229 PM Introduction ContentsAccessories Volume setting PrecautionsConcern for others when listen- ing to MiniDiscs PrecautionsNames of Controls and Indicators About the Rechargeable BatteryRemote control unit Do not drop or subject the battery to shockMain unit 17 18Rechargeable battery power Power SourcePrecautions for alkaline battery use Alkaline batteries powerAC power Type of recording Before RecordingAnalogue recording Digital recordingRecordable MiniDisc Types of discsTo prevent recorded discs from being erased accidentally Playback-only MiniDiscRecording from CDs or MDs Synchro recording Recording Using the Analogue CableTo interrupt recording To stop recordingRecording from a tuner or a CD Manual recording To turn off the powerTo remove the MiniDisc There are cases where digital recording may be impossible Recording Using the Optical Digital CableStart recording Synchro recording Manual recordingRecording from the microphone Mic synchro recording Recording from the MicrophoneRecording from the microphone Mic manual recording To interrupt a synchro recordingTo interrupt a recording Press the /OFF buttonConvenient Recording Function Example when the setting is for 5 min- utesAbout the timed auto mark Timed auto mark will be created ev- ery 5 minutesMaking a track numbe automati- cally Recording tracks as a single trackTo start recording from the middle of an existing track Press the Mode button whilst the record- ing is paused Double time recording in monaural modeTo check the remaining disc time To create your own track numbers whilst recordingTo erase all of the tracks at once To erase tracks To erase tracks one at a timeAbout Track Numbers When recording from digital inputs CDs/MiniDiscs onlyAbout TOC recording When is the TOC recorded?About the TOC Playing a Minidisc Playback does not start when a MiniDisc is insertedEarphones Track number Track nameResume auto play function To interrupt playbackTo stop playback Convenient Playback Functions To interrupt fast playback Random play or repeat playTo play at double speed Mono recording only To display the playing time of an indi- vidual track To check the elapsed time and remaining time of the trackTotal playing time What the editing function can do EditingDisc/Track name Name/stampExample MoveDivide Combine When one or both tracks to be combined have a nameDisc name Following cases, tracks cannot be combinedTrack name Type of characters Characters symbolsLights up To erase a characterTo add characters To change disc names or track namesTo delete characters MD-MT20H for UK22-42 99.3.11, 230 PM Unit Socket Recording will be made in the ana- logue mode Using with Other EquipmentListening through a car stereo Analogue cableHow to read the battery indicator Checking the remaining amount of battery chargeConvenient Operation of the Unit To prevent the unit from being operated by mistakeTo eliminate the confirmation sound To cancel the auto-play functionWhilst in the stop mode To cancel the auto power save function Troubleshooting What is a MINIDISC?If trouble occurs Minidisc System Limitations Batt Empty Error MessagesSpecifications MaintenanceCleaning GeneralMiniDisc Recorder A9903.TO Terms of Guarantee

MD-MT20H specifications

The Sharp MD-MT20H is a versatile and compact MiniDisc player designed for on-the-go music lovers who value both sound quality and portability. Featuring a sleek design, it is lightweight and easy to carry, making it an excellent choice for those who want to enjoy their favorite music while traveling or commuting.

One of the standout features of the MD-MT20H is its support for MiniDisc technology, which allows users to record audio with exceptional clarity. The device employs ATRAC (Adaptive Transform Acoustic Coding), a technology developed by Sony that compresses audio data without significant loss of quality. This results in crisp, clear, and dynamic sound that enhances the listening experience, whether you're enjoying classical music or pumping up the volume on a rock playlist.

The MD-MT20H offers playback capability for various data formats, including MD LP2 and MD LP4, allowing for extended recording times while maintaining sound quality. This flexibility makes it an excellent choice for users looking to maximize their music storage without compromising audio fidelity. With a storage capacity that can handle up to 80 minutes of audio in high-quality mode, users can easily store multiple albums or playlists for a lengthy listening experience.

In addition to its impressive audio capabilities, the MD-MT20H features a user-friendly interface with an intuitive display, allowing users to navigate their music library effortlessly. The device is equipped with built-in EQ settings, enabling users to customize their sound preferences.

Moreover, the MD-MT20H includes a long-lasting rechargeable battery, which is perfect for long trips. Its efficient power management ensures extended playback time, making it suitable for extended listening sessions without the worry of running out of battery.

Connectivity options also stand out, as the device includes a headphone jack and line output features, along with compatibility with various audio systems. This connectivity provides users with the ability to connect the MD-MT20H to other devices, enhancing its functionality.

Overall, the Sharp MD-MT20H combines advanced audio technology, user-friendly design, and exceptional portability, making it an ideal choice for enthusiasts seeking to elevate their music experience. With its blend of features and characteristics, this MiniDisc player stands as a testament to Sharp's commitment to quality in personal audio.