Helio Ocean Call Waiting, SEC/HARD Pause, Adjusting Volume, Caller ID, Using Flashlight

BASIC OPERATION BASIC FUNCTIONS

■CALL WAITING

Notifies you of an incoming call when you are already on a call by sounding a beep tone and displaying the caller’s phone number.

To answer another call while on the handset, press . This places the first call on hold. To switch back to the

first caller, press again.

Call Waiting is a system dependent feature. Please contact your service provider for details.

■2 SEC/HARD PAUSE

Pauses are used for automated systems (i.e., voice mail, calling cards). Insert a pause after a handset number then enter another group of numbers. The second set of numbers is dialed automatically after the pause. This feature is useful for dialing into systems that require a code.

Select

NUMBER “2” or ”3”

To insert a pause, enter a handset number then

press [MENU]. Select either a “2 Sec Pause” (“T”) or a “Hard Pause” (“P”).

Press to dial or [SAVE] to store the handset number.

Please refer to page 38 for more details about storing a handset number.

BASIC FUNCTIONS BASIC OPERATION

■ADJUSTING VOLUME

Adjust the volume of the ringer, key beep and speaker phone.

Select one of the following.

•Ring: Controls the ringer volume.

•Receiver: Controls the receiver volume.

•KeyPad: Controls the keypad volume.

•Effects: Controls the effects volume.

•Wake-up Call: Controls the wake-up call volume.

•Alert: Controls the alert volume.

•Power Up/Down: Controls the power up/down volume.

Adjust volume and press [SAVE] to save it.

To adjust volume in idle mode, press side volume key.

■CALLER ID

Identifies callers by displaying their phone number. If the caller’s name and number are already stored in your contact list, they will both appear.

The caller ID information is stored in Call History.

■USING FLASHLIGHT

This function allows you to use the handset’s camera flash as a miniature flashlight. To use this function, your handset must be in standby mode.

In standby mode, press and hold .

28 29