SciPhone I68 manual Network setup 15.4.1 Network selection, Preferred networks, Gprs connection

SciPhone i68 Quad band Cell Phone User Manual

15.4Network setup 15.4.1 Network selection

Two options available: automatic and manual selection (the former is recommended); by automatic selection, your mobile phone will search the network of the SIM card as a first choice; by manual selection, you need to select the network manually.

15.4.2 Preferred networks

Select the preferred network service provider; by default the network of the currently used SIM card is to be displayed. You can change your preferred networks according to your location. Please consult your local network service provider.

15.4.3 GPRS connection

Set up the GPRS network connection mode. Two options available: always connected or connected when needed. Use the functional key at the bottom left side of the screen to switch between the two modes.

15.5 Security setup

Security setup allows you to encrypt some functions of your phone. It helps to protect your mobile phone and SIM card from being stolen. Enter the password as requested and click “OK” to confirm. If you have entered the wrong password, use the delete key to clear the wrong password and re-enter the correct numbers. Here you can modify the PIN code, PIN2 code and phone lock code.

15.5.1 SIM lock

With this function, you can lock and unlock your SIM card on the phone. To complete this operation, you need to enter the password of your SIM card (or the PIN). Enter the PIN (personal identification number) code to activate /deactivate your SIM lock; by default, it is deactivated. When SIM lock is activated, you will be required to enter your SIM password or the PIN code every time you power on. Note: PIN is provided by your SIM card provider; if you enter the incorrect PIN for 3 times, you will be required to enter the PUK code (personal unlock key), which is used to unlock and modify the PIN code. Please contact your network service provider if your PUK is not provided or you have lost it.

15.5.2 Phone lock

With this function, you can bond your SIM card to your phone. You will be required to enter the correct phone lock whenever you power on. The phone lock of your mobile phone is a 4-digit to 8-digit number; and the default password is 1122.

15.5.3 Data lock

The data lock will give our protection over your personal data, such as phone book and short messages. To enter this function, you need first to enter the correct phone lock number. After activation, select the contents for protection, such as phone book and then click “OK” and save settings. The contents under protection can be displayed when the correct phone lock password is given.

http://www.mysciphone.com