UTStarcom CDM-8615 manual Voice Recognition Mode, Voice Tools Menu, Name, Voice Memo

VOICE RECOGNITION MODE

Voice Recognition (VR) enables you to place calls using your voice and to record voice memos.

1Press and hold until your cellular telephone turns to Voice Recognition mode.

If no recorded voice dial, “No entries recorded” message will be displayed. (Refer to page 92 for how to set one up.)

2“Please say the name after the prompt tone” will be displayed and you will hear “Name please”.

NAME

C	1 Press and hold	until your cellular telephone
H

5turns to Voice Recognition mode.

2If you say a name or tag that is already in the phonebook, the number and name will be displayed and you will hear “Calling (name)”.

VOICE TOOLS MENU

VOICEMEMO

Voice Memo allows you to record a reminder message that can be up to 60 seconds. To record a memo:

1 To start Tools menu, press [MENU] .

2 To enter a voice memo, press .

3 1.1. To record a voice memo, press . Instructions will be displayed and you will hear “Please record at the tone.”

1.2. To stop recording a memo, press [STOP] or [PAUSE/RESUME].

1.3. Press [OPTIONS] after recording a voice memo to “Re-record”, “Review” or “Save”.

1.4. Select “Save” to input a “Voice Memo” caption,

then press . If you do not name the voice	C
memo it will be called “untitled”.
	H
(See page 31 for more information on	5
entering letters, numbers and symbols.)

2.To play voice memo, press . Select the message you want to play.

Press [OPTIONS] for “Play” or “Edit Caption”. To erase the memo, press [ERASE].

3.To play in speaker mode, press . Select the message you want to play.

Press [OPTIONS] for “Play” or “Edit Caption”. To erase the memo, press [ERASE].

4.To erase all voice memos, press . “Erase all voice memos?” will be displayed.

Press [YES] or [NO].

90 91