Audiovox CDM9100 To Mute a Phone Conversation, Speakerphone Mode One-Way, Automatic Talk Timer

To Mute a Phone Conversation

There are two ways to mute the microphone during a call.

1. Press the key under Mute , or press F F .

2.Then the screen displays “Phone is muted!”.

3.To return to normal mode, press the key under

Unmute , or press F F again.

Note: Terminating a call cancels the muting.

Speakerphone Mode (One-Way)

This feature allows you to listen to the party or your voice mail through the built-in speaker, while the ear- piece and microphone are muted.

1.To activate this feature, press V during a call. The screen displays “Speaker ON!”.

2.Press or to adjust the earpiece/speak- erphone volume.

3.To return to normal mode, press V again.

Note: Terminating a call cancels the speakerphone mode.

Automatic Talk Timer

The talk time of the current call will be automatically displayed. For example, “1h23m45s”.

Scratch Pad Dialing

If you enter a telephone number during a call, the num- ber will be stored in the Scratch Pad memory.

After terminating the call, the number you entered can

be dialed by pressing .

Note: You can deactivate “Sending DTMF” so that key- pad tones will not be transmitted to the calling party. See Sending DTMF (F34) on page 74.

Call Waiting

Your service provider may provide Call Waiting service. When you are on a call, you may hear a beep tone alert- ing you of another incoming call.

Your phone displays “New Caller” and the new caller’s name and number. The name is as you programmed it in your phonebook.

1.Press to answer the new call.

2.Press again to switch between the two calls.

29