-Press the Up or Down Button to preview and hear the 3 available call melodies.
-Press the PTT button momentarily to confirm selection.
Refer to the PTT button (4) to transmit ring signal.
Auto Key Lock Selection Mode
This feature prevents accidental channel change to the preferred settings of the unit. The Auto Key Lock function temporarily disables the MODE and SCAN Buttons.
To access the Auto Key Lock selection menu:
-From GMRS standby mode, press and hold the Scan Button for over 2 seconds to Lock the Auto Key function; the ( 
) icon appears on the display.
-The Power, PTT, Up/Down, EMG and Monitor Buttons are not effected.
-To unlock the Auto Key function, press and hold the SCAN button for at
least 2 seconds; the icon ( 
) disappears from the display. NOTE: If the unit is turned off while Key Lock is on, the Key Lock
mode will still be in effect when the unit is turned on again.
Emergency and Assistance Channel Mode
This radio has a quick access button (EMG) to the Emergency and Assistance Channel. This channel is not monitored by local authorities. When using this channel, EMG appears on the display. Pressing this button will set the transceiver to the channel 10, 462.6750 MHz). The Emergency Channel can be used transmit and receive on a special frequency (CH10: 462.6750 MHz).
The Emergency Channel can be selected quickly from any user mode. To access the Emergency Channel mode:
-Press Emergency (EMG) Button; EMG and Channel 10 appears on the display.
-To turn off the Emergency Channel feature, press and release the
EMG Button.
16