2.The clock alarm does not ring during power off, but this feature will be activated again when you turn the power on.
3.The clock alarm may not ring in Auto mode if you skip the alarm time traveling into an area with the different local time.
4.See Ringer Volume Control (F31) on page
73 to change the alarm sound volume.
5In place of the alarm sound, you can use Vibrating Alert (F8) on page 88.
Countdown Timer (F45)
This feature alerts you when the countdown timer ex- pires. The timer can be set to 1 through 99 minutes.
To Start the Countdown Timer
1. Press | F 4 GHI 5 JKL . |
2.Enter the duration, 1 to 99 minutes.
3. Press F
to start. The played.
4.When the timer expires, the alarm will ring for one minute with animation.
5.Press any key to stop ring- ing.
Count Down F45 Timer
00min.
OK
indicator will be dis-
Time is UP!
To Cancel the Countdown Timer
1. Press F 4 GHI 5 JKL again | Count Down | F45 | ||
after the timer has started. | Stop?Yes | 30min. | ||
2. “Count Down Stop?” is dis- | No |
|
| |
|
| OK |
| |
|
|
|
| |
played with the remaining minutes to expire.
3. Scroll to “Yes” and press 
indicator will go out.
Notes: 1. If the timer expires during a call, the alarm will ring after the call.
2.When you turn the power off, the countdown timer will be canceled.
3.See Ringer Volume Control (F31) on page 73 to change the alarm sound volume.
4.In place of the alarm sound, you can use Vibrating Alert (F8) on page 88.
79