System Features
A/B System Selection (F51)
This feature permits you to select which Cellular sys- tem (A or B) your phone uses. When you turn the phone on, it remembers the last A/B setting and will scan the radio channels based on that setting.
Leave this setting as it has been preprogrammed un- less you have a reason to alter the system selection.
To alter the system selection:
1. | Press |
| F 5JKL 1 | . |
|
|
| The current mode will be |
|
| |||
| displayed. |
|
|
|
| |
2. | You can change the current mode by | or | . | |||
3. | Press | F | to set. |
|
|
|
• AUTO ROAM – Auto Roam Mode
The phone will scan the priority systems first, and then
•HOME – Home Only Mode
You can place or receive calls only within your home area or home affiliated area.
•
The phone will scan the
•
The phone will scan the
Note: If your LCD displays “AUTO ROAM”, your phone has been
Enhanced Roaming
Cellular systems are identified by a number called System Identifier or SID.Your phone is equipped with a Preferred Roaming List (PRL) which can be programmed by your Carrier to take advantage of the families of cellular system (SIDs) that your Carrier owns, or has special billing ar- rangements with, in different cities.
In your Home System Area, both “No Service” and “Rm” are off in your display. Outside of the Home System in Ser- vice Areas closely associated with your Carrier, the phone’s display may appear the same as when operating in the Home System.
59