Charging the Battery, Installing Activesync

Getting Started

STEP 3:

CHARGING THE BATTERY

Charge the new battery before using your smartphone for the first time. When the low-battery indicator appears, save any unsaved data you are working on by synchronizing your phone with your PC or a Microsoft Exchange Server*. Do not restart your smartphone until you have connected it to an external power source.

NOTE: Do not leave your smartphone connected to a charger for longer than a week because overcharging can shorten a battery’s lifespan. Your battery will automatically discharge when the device is not in use. Leaving the battery in extremely hot or cold places may also reduce its capacity or shorten its lifespan.

TO CHARGE YOUR BATTERY:

Your smartphone can be charged while powered on or off. Charge your battery by plugging the AC charger into the mini USB connector at the base of the phone.

If your smartphone is turned off, charging is indicated by an amber light. If it is turned on, charging is indicated by the solid amber light on the LED indicator and the charging icon. The completed charge is indicated by either a green light or a charged icon. You can also charge your phone using the USB Sync cable while connected to the PC’s USB port.

*Wireless access to Outlook or Microsoft Exchange requires the assistance of your IT administrator. Additional software, hardware and/or charges may be required. For more information on wireless access to business email visit attwireless.com/workware.

STEP 4:

INSTALLING ACTIVESYNC

Before synchronization can begin, you must install ActiveSync 3.7 or above on your desktop or notebook PC. Use the Companion CD that came with your device, or install ActiveSync for free by downloading the software from Microsoft's web site at http://www.microsoft.com/windowsmobile.

ActiveSync is already installed on your phone.