Installing Your New ANT3901 Antenna

ANT3901new 4/29/03 8:37 Page 5

Installing Your New

ANT3901 Antenna

The ANT3901 installation consists of three basic steps:

Step A: Installing the ANT3901 on your satellite dish.

Step B: Installing the inside diplexers.

Step C: Setting up your TV to use the ANT3901.

Please be sure to complete all of these steps before attempting to watch local channels with your ANT3901.

Fig 1

Step A: Installing the ANT3901 on your satellite dish

Note: Some satellite dishes have integrated multi-switches. The “TO RECEIVER” terminals are connected to the cables coming from the bottom of the dish. Treat these cables as the “TO RECEIVER” terminals of the multi-switch.

Note: For Dish Network owners; some Dish Network installations use smaller SW21 multi-switches. Treat these as one multi-switch with two “OUTPUT” or “TO RECEIVER” terminals.

1.Make sure all satellite receivers are turned off and unplugged from the electrical outlet.

2.Unsnap the antenna from the back notch

of the mounting clamp (see Fig 2 on page 6).

3.Hold the antenna to the back of the dish so that the circular housing is centered with the RCA logo facing out (see Fig 4 on page 6).

4.Maneuver clamps over or around the edge of the dish one at a time (see Fig 3 on page 6).

5.Snap the antenna back into the back notch of the mounting clamp.

6.Tighten the clamps by turning the thumb-wheel screw clockwise.

Note: We recommend the use of the enclosed security clips for any dish. Snap the security clips onto the ANT3901 and slide down towards the mounting clips (see Fig 4 on page 6).

ANT3901 specifications

The RCA ANT3901 is a high-performance indoor multi-directional antenna designed to enhance your television viewing experience by providing excellent reception of Over-the-Air (OTA) signals. With a sleek and modern design, this antenna is perfect for urban dwellers or anyone looking to cut the cord from traditional cable services while still enjoying high-quality TV programming.

One of the standout features of the RCA ANT3901 is its ability to capture signals from a wide range of directions. This multi-directional capability means that users don't need to adjust the antenna each time they want to watch a different channel. The antenna's innovative design allows it to pull in signals from up to 50 miles away, making it a strong contender for those living in areas with varying signal strengths.

The RCA ANT3901 employs advanced technology that minimizes signal noise and enhances reception quality. The built-in amplifier increases signal strength, further ensuring that users can enjoy a clear and stable viewing experience. The amplifier is particularly useful in areas where the broadcast signal may be weaker or obstructed, giving the antenna a significant edge over other traditional models.

Additionally, the ANT3901 features a compact and lightweight design, making it easy to install and position wherever you need it. Whether placed on a shelf, mounted on a wall, or positioned near a window, its versatility allows users to find the optimal setup for their specific environment without compromising on performance.

The setup process of the RCA ANT3901 is user-friendly, often requiring no special tools. The antenna comes with a 10-foot coaxial cable, allowing for flexible placement, and ensuring that it can be positioned for the best possible signal reception. Furthermore, the RCA ANT3901 is compatible with a wide range of TVs and digital receivers, making it a versatile choice for various viewing setups.

Overall, the RCA ANT3901 is an ideal solution for anyone looking to enjoy free broadcast television. Its impressive range, multi-directional capabilities, and sleek design make it a top choice for those wanting to optimize their home entertainment experience. With the RCA ANT3901, users can say goodbye to hefty cable bills while still accessing their favorite channels in high definition.