Putting a Call on Hold
You can place the current call on hold whenever you want. You can also make another call while you have a call in progress if your network supports this service.
To put a call on hold:
1.While on a call, press the left soft key Options. Highlight Hold and press the Select soft key. The call is on hold.
2.You can reactivate the call whenever you want, by pressing the Resume soft key.
To make a call while you have a call in progress:
1.Place the call on hold using the previous procedures, and enter the phone number that you wish to dial or look it up in the Address Book.
2.Press the 
key to dial the second call.
When you have an active call and a call on hold, you may switch between the two calls, changing the one on hold to active and placing the other on hold. To switch between the two calls, simply press the Options soft key and select Swap. The current call is placed on hold and the call on hold is reactivated so that you can continue conversing with that person.
In Call Options
During a call, press the Options soft key to access the following:
•Hold: Places the call on hold.
•New Call: places the current call on hold and allows you to enter and dial another number.
•Contact List: access the Address Book information.
•Message: allows you to create New Text Message or My Messages.
•Calendar: displays the calendar on the phone.
•Mute Keypad Tone: turns off the key sound during the call.
•Send DTMF: sends DTMF (Dual Tone
If you have are in a
•Join: joins the calls you have established with your phone.
•Split: when a multiparty call is in progress, the split option will eliminate the two calls into their original calls.
•End Held Call: ends the call that is placed on hold.
When you want to finish, end each call normally by pressing the key.
Switching off the Microphone (Mute)
You can temporarily switch your phone’s microphone off, so that the other person cannot hear you.
17