Samsung GH68-23902A Adapt Digits To adapt digit dialing, do the following, Reset Digits

Digit Dialing to factory defaults. (For more information, refer to “Reset Digits” on page 59..)

Adaptation involves recording several sequences of four digits each. The recording process takes about a minute.

Tips for Adapting Digit Dialing

•Use Adapt Digits in a quiet place.

•Make sure you wait for the beep before starting to speak.

•Speak clearly, and say each digit distinctly.

•If you make a mistake while recording a sequence of digits, or if there is an unexpected noise that spoils the recording, re-record that sequence.

•Only adapt digits if you are regularly having problems with digit dialing. Once you adapt, digit dialing will not work as well for other people using your phone. (You can always reset digit adaptation to its original state, as described below.)

Adapt Digits

To adapt digit dialing, do the following:

1.At the Voice SVC sub-menu, select Voice Settings ➔ Digit Dialing ➔ Adapt Digits.

Your phone displays the first digit sequence and “Please say” plays through the speaker followed by the four digits appearing in the display.

2.Wait for the beep and say the digits using your normal tone of voice. After a moment, the phone plays back the recording and prompts “Did the recording sound ok?”

•If the recording was good, say “Yes.”

•If you need to re-record, say “No.”

If you say “No,” the phone prompts you to pronounce the digits again. Wait for the beep and then say the digits. Repeat this step until you’re satisfied with the recording.

3.After confirming that the recording sounds “ok”, continue the recording process with the next set of digits.

4.After six sets of digits, the phone asks whether you want to do more adaptation. Answer “Yes.”

5.Repeat steps 4 and 5 for another six sets of digits. After the second group of six sets of digits, “Adaptation complete” plays through the speaker and you are returned to the Adapt Digits menu.

Reset Digits

To reset digit dialing to factory default settings, do the following:

1.At the Voice SVC sub-menu, select Voice Settings ➔ Digit Dialing ➔ Reset Digits.

59