As shown. Do not tighten the Bolts yet | Weslo WLTL35530 instruction

3.Three Cage Nuts (35) must be inserted into the lower end of each Upright (62, 76). The Cage Nuts must be inserted from the inside, in the locations shown by the arrows at the right. (Note: The front of each Upright is taller than the back. Do not insert a Cage Nut into the lower hole in the front of each Upright.) To insert a Cage Nut, hook one side of the Cage Nut into a hole as shown, and then use a flat-bladed screw- driver to press the other side of the Cage Nut into the hole.

Insert a Plastic Shim (103) into each side of the post on the right side of the Base (11). Next, orient the Right Upright

(62)as shown, and insert it into the Base. Make sure that the Wire Harness (21) does not fall into the Right Upright. Be careful to avoid pinching the Wire Harness. Note: If necessary, tap the Right Upright with a rubber mal- let until it is fully seated in the Base. If the Right Upright can- not be fully seated, remove the outer Plastic Shim and then insert the Right Upright.

Attach the Right Upright (62) to the Base (11) with three 1” Bolts (8) and three Star Washers (9). Do not tighten the

Bolts yet.

Assemble the Left Upright (62) in the same way.

4.Identify the Right Handrail (47), which has a large hole in the left side. Attach two Cage Nuts (35 [not shown]) to the inside of the bracket on the Right Handrail as de- scribed in step 3. Feed the Wire Harness (21) into the hole in the bottom of the Right Handrail and out of the large hole in the left side. (Note: It may be helpful to use needlenose pliers to pull the Wire Harness out of the large hole.) Press a Handrail Cap (41) onto the lower end of the Right Handrail as shown.

Insert the bracket on the Right Handrail (47) into the top of the Right Upright (62) so the Handrail Cap (41) is against the Right Upright. Attach the Right Handrail and the Handrail Cap with three 1” Bolts (8) and two Washers

(57)as shown. Do not tighten the Bolts yet.

Attach the Left Handrail (not shown) as described above. Note: There is not a wire harness on the left side.

5.Hold the Crossbar (34) between the Handrails (1, 47). Attach the Crossbar with two Crossbar Screws (53). Do not tighten the Crossbar Screws yet.

Attach the ring on the end of the ground wire to the small hole in the side of the Right Handrail (47) with a Silver Ground Screw (104).

	3
	21
	These
	holes	76
	must be	Front of
	on this	Front of
	on this	Upright
	side	Upright
	side

62
	9	No Cage
	9	Nut
103		Nut
103
		35
9
8	11
8
4	21
	21
	Large
	Hole
	Bracket
47		8
47		57
	8	62
		62
	57	41
	57
	8
5
1		Ground
1		Wire
	34	Wire
	34
		104
53
	47
		53

WLTL35530 specifications

The Weslo WLTL35530 is a versatile treadmill designed for users seeking an effective home workout solution. Combining practicality with advanced technology, the WLTL35530 stands out in a crowded marketplace, catering to both novice and experienced runners alike.

One of the standout features of the Weslo WLTL35530 is its innovative SpaceSaver design. This treadmill can be easily folded up when not in use, making it an excellent choice for those with limited space. Users can engage in their fitness routines without sacrificing valuable room in their homes. The easy-to-lift design ensures that transitioning from workout mode to storage is smooth and effortless.

The WLTL35530 boasts a powerful 2.0 horsepower motor, providing a consistent performance for various workout intensities. With a top speed of 10 mph, it caters to a wide range of fitness levels, accommodating everything from brisk walking to intense running. The motor is designed for durability, ensuring long-lasting use for fitness enthusiasts.

One of the key features that enhance user experience is the adjustable incline. The WLTL35530 offers a manual incline setting that allows users to simulate uphill walking and running, thereby increasing workout intensity and engaging different muscle groups. This feature is essential for those looking to elevate their training regimen.

Additionally, the treadmill includes a built-in workout monitor, which tracks essential metrics such as time, distance, speed, and calories burned. This real-time feedback is crucial for users who want to stay motivated and monitor their progress. The easy-to-read display ensures that all vital information is accessible during workouts.

Comfort is paramount in the design of the Weslo WLTL35530, as it features a cushioned deck that minimizes the impact on joints. This makes it suitable for users of all ages, particularly those with a history of joint issues. The cushioned surface provides a more comfortable running experience compared to traditional treadmills.

Finally, the treadmill integrates a music port and built-in speakers, allowing users to enjoy their favorite tunes or podcasts while exercising. This feature can significantly boost motivation and make workouts more enjoyable.

In summary, the Weslo WLTL35530 is an excellent addition to any home fitness regime, offering impressive features like its SpaceSaver design, powerful motor, adjustable incline, trackable performance metrics, cushioned deck, and an integrated music system. This treadmill is designed to help users achieve their fitness goals comfortably and effectively.