VDO Cyclecomputing C05+ manual 5mm, Mounting the spoke magnet

Page 5

1.3 Mounting the spoke magnet

GB Distance between magnet and sensor should be approx. 1-5 mm.

1-5mm

1-5mm

In case this distance is not achievable in the current positioning, slide the sensor and the magnet on the fork or spoke accordingly.

Watch out: Please remove the computerhead from the handlebar holder when you intend not to use your bike for a longer period of time. (battery power)

4

Image 5

Contents C05+ Mounting the system Mounting the handlebar holder PrefaceScrew Mounting the speed transmitter / sender Mounting the spoke magnet 5mmOpen Installing battery into computer headTwist-Click mounting of computer onto holder Function IndicatorLock Unlock Click Operating your VDO Cytec C05+ Function Information features of your VDO Cytec C05+Information Set-up modeHow is the wheelsize precisely determined?? Programming setting up your wheelsizeWS in mm Entering your wheelsize / entering odometer Page Return to Main Display Setting the clock CLK Stand-by-mode Resetting information to zeroDST = trip distance ATM = trip counter Troubleshooting Battery changeChanging the battery in the computer head Abuse or alteration WarrantyContents