Instructions Battery, Focusing | Nikon Monarch Gold (E) instruction

Instructions

(1) Battery

CAUTION: When installing batteries, make sure the firearm is unloaded. Use safe firearm handling practices at all times.

Your Nikon Monarch Gold (E) 2.5-10x50 SF and 2.5-10x56 Dual Illuminated Reticle are powered by one 3V lithium battery (CR2032 or equivalent). When your reticle grows dim or not light at all, you need to replace the battery.

How to replace battery.

1.Hold the rheostat intensity dial tightly and turn the cover with coin counter clockwise.

2.Take out the old battery and put one 3V Lithium Battery into the compartment. Be sure (+) side to be up.

3.Put the cover back and turn it clockwise with coin until the cover is firmly secured.

4.Turn the rheostat intensity dial to the desired color (red or green) and intensity (OFF to 5 : 6 steps).

(2) Focusing

1.Look through the eyepiece with your eye positioned about 10cm (4 in) away from the eyepiece lens (Fig. 3-1), and you will see the Nikoplex reticle (Fig. 3-2), the Reticle #4 reticle (Fig. 3-3) or the IL

Reticle #4 reticle (Fig. 3-4), or the BDC reticle (Fig. 3-5).

On the model IL Reticle #4 reticle, if the illumination function is turned on, only the intersection point of the cross wire appears faintly illuminated.

Be sure your eye is positioned within proper alignment and proper eye relief otherwise the view will “black out”.

2.Point the objective end of the scope at the sky (Do not point at the sun) or at a plain unpatterned wall. Turn the eyepiece adjustment counter-clockwise and then turn it clockwise until the reticle appears sharp.

1)Eyepeice Adjustment

2)Eye Relief

The reticle should be immediately crisp and clear to the quick glance.