PART IDENTIFICATION CHART
Use the chart below to identify the small parts used in assembly. The number in parenthesis below each part refers to the key number of the part, from the PART LIST on page 14. The number after the dash indicates
the quantity needed for assembly. Note: Some parts may have been
M5 Nylon | M8 Nylon | 1/2” Nylon |
Locknut | Locknut | Locknut |
M4 x 19mm Flange |
|
|
Screw | Pivot Washer | Pedal Washer |
M4 x 12mm | M8 x 19mm | M5 x 30mm |
Button Screw | Button Screw | Button Bolt |
M8 x 60mm Bolt | M8 x 38mm Button Bolt |
M8 x 63mm Carriage Bolt
Note: Extra parts may be included.
5