Weslo WLTL45312 user manual Assembly, Make sure that the power cord is unplugged

Page 6

ASSEMBLY

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed.

Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

Assembly requires the included allen wrenches

and your own phillips screwdriver

,

rubber mallet

, and adjustable wrench

.

 

For help identifying the assembly hardware, see the drawings below. If a part is not in the parts bag, first check to see if it has been pre-assembled.

3/4” Tek Screw (58)–2

1” Tek Screw (39)–6

1/2” Screw (49)–6

3/4” Screw (2)–6

2” Bolt (64)–2

1/2” Ground Screw

 

(75)–1

 

 

2 1/2” Bolt (37)–2

Washer (38)–2

Wheel Nut (32)–2

 

 

1.Make sure that the power cord is unplugged.

With the help of another person, carefully raise the Uprights (69) to the vertical position. Insert one of the Extension Legs (63) into the treadmill as shown. (Note: It may be helpful to tip the Uprights as you insert the Extension Leg.) Make sure that the Base Pad (61) is under the Extension Leg.

Insert the other Extension Leg (63) in the same way.

1

69

63

61

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents QUESTIONS? Model No. WLTL45312 Serial NoCustomer HOT Line Table of Contents Important Precautions Page Before YOU Begin Right SideBack Assembly Make sure that the power cord is unpluggedPinch the Upright Wire. Firmly tighten the Bolt. Attach Uprights. Make sure that the Extension Legs remainLower Tek Screw, without the Round Base Pad, first Page Page Operation and Adjustment HOW to Plug in the Power CordPerformant Lubetm Walking Belt Insert the key into the console Console DiagramSTEP-BY-STEP Console Operation Pressbelt. the Speed + button to start the walkingMeasure your heart rate if desired Change the incline of the treadmill as desiredPulse display -This Whenkey. you are finished exercising, removeHOW to USE the Hand Weights HOW to Fold and Move the Treadmill HOW to Fold the Treadmill for StorageHOW to Move the Treadmill HOW to Lower the Treadmill for USE Troubleshooting Problem The power turns off during useTop Problem The walking belt slows when walked on Workout Guidelines Conditioning GuidelinesExercise Intensity Exercise FrequencySuggested Stretches Remove this Exploded Drawing and Part List from the Manual Key Qty Description Key No. Qty. DescriptionExploded DRAWING-Model No. WLTL45312 Ordering Replacement Parts Limited WarrantyIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT
Top Page Image Contents