Loading Discs, Play Discs, Pause Discs, Stop Playback

RS2100 EN (04_07_06) 7/7/06 11:29 AM Page 16

Loading Discs

Press SOURCE repeatedly to select CD mode.

Press DISC 1

/ 4

to open

the desired disc tray. (For example, press DISC

1 to open disc tray 1)

3.Insert a disc with label face up.

4.Press the same DISC key to close the disc tray, or press a different DISC key to open a different disc tray directly.

5.Repeat steps 2-4 to load discs in all the disc trays.

A Solid disc tray icon lights on the display indicating that the corresponding tray is occupied. The current disc tray icon flashes on the display.

If the disc is a mp3 / WMA CD, the respective mp3or WMA lights on the display.

Note:

Be sure to remove all discs from the disc compartment before moving or transporting the unit.

In TUNER, PC, PORTABLE PLAYER, USB or AUX mode, the corresponding disc will start playback when DISC 1 /2 /3 / 4 /5 is pressed. If there is no disc

in the corresponding disc tray, the current disc will be set to the next occupied tray.

While playing one disc, you can open/close other trays to change

disc without interrupting the playback.

• To play all discs in the disc tray

• Press				in stop mode to play all discs.

•Press CD 12/3/4/5 on the remote control to

play the corresponding disc..

•Press DISC SKIP on the main unit to switch to the next disc.

•Press or to select the track and

press to start playback.

Attention:

Do not push to force closing of the tray during CD playback or tray opening.

Press during playback to pause disc. Press again to resume.

During playback, press to stop playback. The unit returns to navigation mode briefly (approx. 10 seconds) before entering stop mode.

Press CD 12/3/4/5 to direct access the corresponding disc or DISC SKIP on the remote to skip discs.

In CD stop mode, press to enter navigation mode and show disc menu.

In CD navigation mode, press to return to stop mode.