INCLINE ADJUSTMENT
The incline of the treadmill can be adjusted to two positions. Hold the front of the Frame (29), and remove the two Adjustment Pins (4). Raise or lower the Frame, align the holes in the Frame with one of the sets of holes in the Uprights (35, 36), and then reinsert the Adjustment Pins.
CAUTION: Make sure that both Adjustment Pins (4) are fully inserted at the same height.
35 | 36 |
| 4 |
29
4
LUBRICATING THE WALKING PLATFORM Before the treadmill is used, the walking platform should be lubricated. Open the included lubricant packet. Reach under one side of the walking belt as far as you can, and apply half of the lubricant to the walking platform. Then, reach under the other side of the walking belt and apply the remaining lubricant.
After you have applied the lubricant, walk on the treadmill for a few minutes to spread the lubricant.
Apply lubricant here |
Apply lubricant here |
10