Weslo WETL26905.1 user manual Crossbar Screws yet

Page 8

6.Carefully pull the opposite end of the tape to pull the Wire Harness (60) up through the Right Handrail (59) and out of the hole in the side of the Right Handrail.

Remove the tape from the Wire Harness (60).

7.Orient the Crossbar (91) with the large hole at the right of the smaller hole as shown. Set the Crossbar against the Handrails (53, 59) with the brackets on the Crossbar aligned with the two small holes in each Handrail. Attach the Crossbar with two Crossbar Star Washers (93) and two Crossbar Screws (92). Do not tighten the

Crossbar Screws yet.

With the help of as second person, hold the console assembly near the Crossbar (91). Connect the pulse wire from the Crossbar to the pulse wire from the con- sole assembly. The connectors should slide easily into each other and snap into place. If they do not slide easi- ly and snap into place, turn a connector and then insert it.

Insert the ground wire through the two plastic ties shown in step 8. Attach the end of the ground wire to the small hole in the side of the Right Handrail (59) with a Silver Ground Screw (69).

8.Place the Console Base (52) on the Crossbar (91), Right Handrail (59) and the Left Handrail (not shown). Be care- ful not to pinch any wires. Attach the Console Base with four 3/4” Screws (2) (only two Screws are shown). Do not overtighten the Screws.

Insert the Wire Harness (60) through the two indicated plastic ties on the Console Base (52). Next, touch the Right Handrail (59) to discharge any static. See the inset drawing. Insert the connector on the end of the Wire Harness into the red socket beneath the console. The connector should slide easily into the socket and snap into place. If the connector does not slide easily and snap into place, turn the connector and then insert it.

Make sure that the connector and wire appear as shown in the inset drawing. IF THE CONNECTORS ARE NOT

INSERTED PROPERLY, THE CONSOLE MAY BE DAMAGED WHEN THE POWER IS TURNED ON.

6

60

Tape

 

 

59

 

7

 

 

 

 

 

 

Console

 

 

 

Assembly

53

 

 

Ground

 

 

 

 

 

69

Wire

93

91

 

 

92

Pulse

 

 

 

Wires

 

93

 

 

59

 

 

92

 

 

 

8

52

 

 

 

60

 

 

 

Ties

91

 

 

 

 

2

 

 

 

59

 

60

 

 

 

 

 

 

 

Socket

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents QUESTIONS? Model No. WETL26905.1 Serial NoTable of Contents Important Precautions Page Before YOU Begin FrontRight Side BackAssembly Page Crossbar Screws yet Screws and then tighten them Top ViewOperation and Adjustment HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt GFCI-equipped outletsConsole Diagram Features of the Console HOW to Turn on the PowerSelect the manual mode Insert the key into the consolePress the Start button or the Speed increase Button to start the walking beltWhenkey. you are finished exercising, remove Measure your heart rate, if desiredInsert the key fully into the console Select a speed programWhen the program ends, remove the key from Console Measure your heart rate if desiredHOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Fold the Treadmill for Storage HOW to Lower the Treadmill for USE Troubleshooting Problem The power turns off during useProblem The walking belt slows when walked on Conditioning Guidelines Exercise IntensityWorkout Guidelines Exercise FrequencyPart LIST-Model No. WETL26905.1 Key Qty DescriptionPart Identification Chart R1105A Ordering Replacement Parts

WETL26905.1 specifications

The Weslo WETL26905.1 is a versatile and popular treadmill designed to cater to a variety of fitness enthusiasts, from beginners to seasoned runners. This model stands out for its blend of essential features, user-friendly design, and effective performance, making it a worthy addition to any home gym setup.

One of the key features of the Weslo WETL26905.1 is its powerful 2.5 CHP motor, which provides smooth and consistent performance, whether you're engaged in a fast-paced run or a brisk walk. The motor's capacity allows for a decent speed range, accommodating users of different fitness levels. Additionally, the treadmill offers an incline feature, enabling users to simulate hill workouts and enhance their training intensity.

The running surface of the Weslo WETL26905.1 is spacious, offering 16” x 50” of tread width, which provides ample room for comfortable strides. This is essential for ensuring safety and stability during workouts, particularly for users with longer gaits. The inclusion of a cushioned running deck is another standout feature, as it helps to reduce the impact on joints, making it a suitable choice for those recovering from injuries or with joint concerns.

In terms of technology, the Weslo WETL26905.1 is designed with user convenience in mind. It includes a built-in Bluetooth connectivity feature, allowing users to sync their devices and track workout metrics through compatible fitness apps. This integration not only enhances motivation but also enables personalized training plans to be easily followed.

The console of the treadmill is equipped with an easy-to-read LCD display, providing real-time feedback on critical workout metrics such as speed, time, distance, and calories burned. Furthermore, it includes pre-set workout programs to aid users in achieving their fitness goals more effectively. These programs are designed to add variety to workouts, helping to keep users engaged and motivated.

Incorporating a space-saving design, the Weslo WETL26905.1 features a folding mechanism, allowing for easy storage when not in use. This aspect is particularly beneficial for those with limited space in their homes.

Overall, the Weslo WETL26905.1 treadmill combines essential features with modern technologies, making it a practical choice for individuals looking to elevate their fitness regime. Its emphasis on user comfort, performance, and adjustability positions it as a competitive option in the home fitness market.
Top Page Image Contents