1.Read all instructions at the top of page 4 before beginning assembly.
Refer to figure 1 and identify the left and right Uprights (34). Attach the Lower Crossbar (1) to the right Upright with two 3/8Ó x 2Ó Carriage Bolts
(35)and two 3/8Ó Nylon Locknuts (32). Do not tighten the Nylon Locknuts yet.
Slide the lower end of the Left Brace (2) into the Right Brace (3).
Attach the Lower Crossbar (1) to the left Upright
(34)with two 3/8Ó x 2Ó Carriage Bolts (35) and two 3/8Ó Nylon Locknuts (32). Do not tighten the
Nylon Locknuts yet.
2.Slide a Leg Cover (22) onto each handle and down over the top of the Left and Right Legs (4,
5). Wet the ends of the right and left handles with soapy water. Slide a Handgrip (29) onto each handle.
Attach the right Pivot Bracket (8) to the right Upright (34) with a 3/8Ó x 1 1/4Ó Screw (18), a 3/8Ó Washer (19), and a 3/8Ó Spacer (20) as shown.
Attach the left Pivot Bracket (8) to the left Upright
(34)in the same manner.
3.Attach the Upper Crossbar (36) to the left and right Uprights (34) with four 3/8Ó x 2Ó Carriage Bolts (35) and four 3/8Ó Nylon Locknuts (32) as shown.
Tighten a #8 x 3/4Ó Screw (28) into the Right Brace (3).
Tighten all parts used in steps 1 to 3.
Fig. 1 |
|
|
|
|
| LEFT |
|
|
|
| 34 |
|
|
|
32 |
| 35 |
| RIGHT |
|
| 34 | ||
|
|
| ||
2 |
|
|
|
|
|
|
|
| 35 |
|
|
|
| 1 |
|
| 3 |
| 32 |
|
|
|
| |
Fig. 2 |
|
|
|
|
22 |
| 29 |
|
|
|
|
| 22 | |
| Handles |
| ||
|
|
| ||
| 5 |
|
|
|
| 8 |
|
|
|
| 34 | 4 | 20 |
|
|
|
| ||
|
|
|
| |
|
|
| 8 | 19 |
|
|
|
| 18 |
|
|
|
| 34 |
Fig. 3 |
|
| 35 | 36 |
|
|
|
| |
|
|
|
| 35 |
|
| 34 |
|
|
32 |
|
|
|
|
| 32 |
|
| 34 |
|
|
|
| |
| 3 |
|
|
|
| 28 |
|
|
|
5