Nikon 10x44 SF IL, 16x50 SF Focusing, Non-illuminated Reticle model, Lock Ring, Nikoplex Reticle

(2) Focusing

(1)笊Look through the eyepiece with your eye positioned about 10cm (4 in) away from the eyepiece lens (Fig. 3-1), and you will see the Nikoplex reticle (Fig. 3-2) or Milliradian Dot

reticle (Fig. 3-3).

(1)�Be sure your eye is positioned within proper alignment and proper eye relief otherwise the view will "black out".

(1)笆Point the objective end of the scope at the sky (Do not point at the sun) or at a plain unpatterned wall.

(1)�Loosen the lock ring. (Non-illuminated Reticle model)

(1)�Turn the eyepiece adjustment counter-clockwise and then turn it clockwise until the reticle appears sharp.

(1)(Non-illuminated Reticle model)

(1)笳Finally, without moving the eyepiece adjustment, turn the eyepiece lock ring as Fig. 3-4 to end so that the eyepiece adjustment will be firmly locked.

The lock ring must be firmly tightened to ensure an air-tight seal.

6

Non illuminated Reticle model		笊 Lock Ring		笆 Eyepiece Adjustment	笳 Eye Relief
笊		笆	笳
						Fig. 3-2		Fig. 3-3
						Nikoplex Reticle	Miliradian Dot Reticle
			Fig. 3-1		笊	笆		Eeypiece Adiustment
Illuminated Reticle model
笊 Eyepiece Adjustment	笆 Eye Relief
							Lock Ring	Fig. 3-4

7