Newcon Optik NVS 7-4X Focusing, Interpupillary distance, Installation of interchangeable lenses

Page 17

Focusing

To obtain sharp image at other distance adjust the lens focus (2)leaving eyepiece setting intact. You should be able to obtain a sharp image for distances from 2-20 m to infinity, depending on the objective lens magnification.

If you wear eyeglasses or NBC protective mask, you may like to fold the rubber eyecup.

Interpupillary distance

The unit is designed to accommodate interpupillary distance of 57-73 mm without any additional adjustment and should be comfortable for 99% of adults.

Installation of interchangeable lenses

Do not apply an excessive force when changing the lenses.

1.Make sure the unit is off (1).

2.Remove the lens cap

3.Detach the current lens: hold the lens by its base and rotate it counter-clockwise. Once the lens has been removed, store it in a safe, clean space.

4.Screw in (clockwise) new lens.

The threads are very fine (to prevent humidity penetration) and can be damaged easily. Do not apply force to the lens rotation. If lens does not screw in smoothly make sure that the threads match.

Unit is ready for operation immediately after the lens change.

14

Image 17
Contents NSN NVS 7-4x / NVS 7-5x / NVSImportant Information Precautions Contents Warranty Customer Support Acceptance Certificate Overview Some typical activities where NVS 7 can be usefulFeatures Page Standard delivery set Optional accessoriesDelivery SET Unit specifications SpecificationsImage Intensifier Type Generation/Grade Main tube parametersField of view cleanness Spatial frequency-contrast characteristicNVS7 Unit DesignNVS7 NVS7 Operation Instructions Installing batteryOperating at night Switching the unit offAdjusting to individual vision Interpupillary distance FocusingInstallation of interchangeable lenses Page Troubleshooting What This Warranty Does Not Cover WarrantyFrom all other countries Customer SupportUS Customers Acceptance Certificate Night Vision Device Newcon Optik