L-3 Communications X200xp manual Camera Warm-Up, Camera Shutter

Batteries

⇒When replacing batteries, always replace BOTH batteries. Mixing a fresh battery with a partially discharged battery is potentially hazardous.

⇒Never mix battery types (Alkaline, rechargeable, Lithium, etc). Both batteries must be of the same type.

⇒Remove batteries if the camera is to be stored for extended periods (2 weeks or more).

⇒Always follow the battery manufacturers’ directions for proper disposal of batteries.

•Turning on the Power Switch on the on/off knob Turn the on/off dial knob Clockwise to turn on the camera

Camera Warm-Up

The camera requires approximately 3 seconds of warm-up time. During these 1st 3 seconds after the camera is switched on, a logo will appear in the Display. After 3 seconds have passed, the logo will disappear, and video of the thermal scene will begin.

Camera Shutter

To maintain an optimum Thermal Image, the X200xp will automatically shutter. During this shutter, the video will freeze for approximately ½ second, and a faint “click” sound may be heard inside the camera. Shuttering will occur in the 1st 4 minutes after turning on the camera at 30-second intervals. Otherwise, the

13