ATN manual Mounting the ATN PS-15 to a helmet, Attaching ATN PS-15 to Hemet Mount

Page 23

B. Mounting the ATN PS-15 to a helmet

Attachment of ATN PS-15 to a standard PASGT helmet. The Hel- met mount fits securely onto helmet via a rugged strapping as- sembly and grooved hooks.With helmet mount, the PS-15 can be positioned directly in front of the user’s eyes or flipped up out of the viewing position.

1.Install the mount onto the helmet as shown on the picture.

2.Tighten and fix the straps (A)

3.Attach the goggles to the rail.

4.Loosen screw (C). Push button (B) and insert the bracket of the PS-15 into rail (D) of the helmet mount.

5.Place the helmet with PS-15 onto head.

6.Loosen the screw (C) and move the unit for proper eye relief adjustment.

7.The PS-15 helmet mount has a flip-up mechanism. Push the button (E) on the side of mount and lift the unit up until the unit gets fixed in the top position. When the device reaches the top/ upper position it will turn off automatically.

8.Push the same button (E) to lower PS-15 to viewing position.

The unit will automatically turn back on again for continuation of the operation.

A

B E

C

DA

Figure 3-2

Attaching ATN PS-15 to Hemet Mount

3-3

Image 23

Contents ATN PS-15 Manual PS-15001 Revision 1 May Safety Summary Equipment Limitations Table of Contents Figure Title List of FiguresList of Tables Manual Overview HOW to USE this ManualUsage General Information ATN PS-15 Night Vision Goggles Supplier General InformationType of Manual Model Number and basic descriptionList of Abbreviations Warranty InformationTechnical Information Equipment Description System Description Perfomance WEIGHT, DIMENSIONS, and PerformanceDescription of Major Components Kit Components ATN PS-15 Major ComponentsOperator’s Manual Battery 123A LithiumBattery AA Alkaline Battery AdapterCamera/Camcorder Adapter Headmount AssemblyBrow Pads 3X Afocal Lenses Shoulder Strap Hard Shipping/Storage Case IR-450 IR illuminatorMounting Procedures Attaching ATN PS-15 to Head Mount Mounting ProceduresMounting the ATN PS-15 to a HeadMount Attaching ATN PS-15 to Hemet Mount Mounting the ATN PS-15 to a helmetATN PS-15 with IR450 Mounting the Picatinny Adapter to the ATN PS-15Mounting IR450 to the ATN PS-15 Mounting the Picatinny Adapter to the ATN PS-15Mounting Camera/Camcorder to the ATN PS-15 ATN PS-15 with 3x lenses Mounting 3x Lens to the ATN PS-15Operating Procedures Operating Instructions Battery InstallationBattery Life CR123A Battery Installation Install CR123A battery as followsMechanical Functions Install standard AA batteries as followsAA Battery Installation Mechanical Functions Infrared IR Illuminator Operations Infrared IR Illuminator OperationsOperational Defects Shading Zeroing Operational DefectsShading Edge Glow Edge GlowFlashing, Flickering, or Intermittent Operation Cosmetic BlemishesBright Spots and Emission Points Bright SpotsEmission Points Fixed-Pattern Noise Fixed-Pattern Noise Chicken WireChicken Wire Maintenance Preventive Maintenance Checks and Services for ATN PS-15 Preventive MaintenancePreventive Maintenance Checks and Services for ATN PS-15 Preventive Maintenance Checks and Services for ATN PS-15 Preventive Maintenance Checks and Services for ATN PS-15 PS-15 on Operator Troubleshooting Malfunction Test or inspection Corrective Action Operator Troubleshooting for ATN PS-15Malfunction Test or inspection Corrective Action Browpad Replacement Cleaning the ATN PS-15Headmount Maintenance Neckpad Reinstallation Neckpad ReinstallationLacing the Sliding Bar Buckle Lacing the Sliding Bar BuckleMaintenance/Replacement of the tube in the PS-15 Tube Maintenance / ReplacementTable A-1 ATN PS-15 End Item Componennents END Item ComponentsTable B-1 ATN PS-15 Repair Parts List Repair Parts ListIndex IND-2 North American Office