SPECIFICATIONS
Generation | 2nd, 2nd+, 3rd, 4th |
Magnification | 2.5X (5X optional) |
Lens system | F1:1.2, F43mm |
FOV | 20 deg. |
Range of focus | 1m to infinity |
Reticle | Red On Green |
Windage & elevation adjustments | 1/2MOA |
IR illuminator | Super 450mw |
Battery life | |
Dimensions | 9.8” x3.8” x3.3” |
Weight | 1.5kg/3.3 Lbs |
Diopter adjustment | |
Operating temperature |
PREPARATION FOR OPERATION
Before getting started make sure to follow these steps:
•Install the battery into its housing with the polarity order shown on the main body of the unit.
•Switch on the Aries scope with the protective lens cover still attached to the lens.
•Make sure that the green luminance of the light intensifier tube is present.
•Observe the scene, and adjust the diopter and/or lens for opti- mal image clarity.
•You may now enter a dark environment or simply shut the lights off in order to darken the room.
•Next, remove the lens cap/daylight filter.
•Observe the scene, and adjust the front lens for ideal focus.
•Finally, you may want to turn the infra red (IR) illuminator on. Notice the ability of the Aries scope to see in total darkness with the aid of the IR illuminator.
Battery installation
OPERATING
MOUNTING
1.Slightly loosen the fixing screws on the 7/8” weaver rail built into the scope.
2.Place the scope on the dovetail mount of the fire arm making certain that the mount aligns with the receptor attachment screw groove. Adjust as necessary.
3.Tighten the fixing screws.
NOTE: Receptor attachment screws may need to be tightened after continuous shooting.
MOUNTING SYSTEM
The ATN Night Vision Riflescopes Mounting System allows to change the position of the rif- lescope flexibly on the weapon in relation to a shooter in combination with the fixed positions already available on the weaver rail. For this purpose in the base of the mounting bracket there is a rail with a fixing projection. There are three grooves in the mounting bracket for mounting this rail. Besides it is possible to change the position of the riflescope additionally by 1/3 of inch. For doing this one needs to
2