IR Illumination, Rangefinde Reticle | ATN 350c, 6800c, 7800c, 330

IR ILLUMINATION

Infra-red (IR) Illuminators are common for night vision technology. The IR light greatly enhances the performance of your Aries scope, while remaining almost totally invisible to the naked eye. In dark environment, power up the Aries scope. Now, find a scene and examine it with- out the IR on then with IR powered up. Note the difference in illumination. It is important to remember that the IR illuminator is simply an infra red light source, and like any light source it may loose its effectiveness over a great dis- tance.

To fix the IR Illuminator to the riflescope screw the thumb screw on the IR into the thread on the scope. To switch the IR on and to adjust the brightness rotate the rheostat located on the side of the Illuminator. The changes of adjust- ment could be observed while looking through the scope. The IR is off when the mark on the rheostat coincides with “0” on the scale.

NOTE: The riflescope could be equipped with digitally controlled IR.

The IR illuminator control buttons are located on its side. To switch the Digital IR illuminator on/off press “+” and “-” buttons simultaneously. When the IR illuminator is switched on you can see the green LED lit. By pushing the buttons “+” and “-” you may adjust the IR brightness.

The IR beam is focusable to change the field of coverage. To change the beam width slightly turn the IR lens.

You could change the IR control panel fitting your needs. The screw-tool included into the set should be used for weakening the fixing screw located on the IR. Rotate the IR placing at in the most convenient position. Tighten the screw with the screw-tool to fix the new posi- tion.

Battery	IR Brightness
Housing	Adjustment
	IR Elevation
	IR Focusing
Fixation
Screw	IR Windage

RANGEFINDE RETICLE

The range finder reticle in your Night Vision Rif- lescopes was designed to assist you in deter- mining the range of your target.

These distances are based on a 6’ target.

ARIES350/6800/7800 RETICLE

A 6’ target fits between the numbered baseline (the three short horizontal lines directly next to the numbers) and the main horizontal line. If the 6’ target fits between the 1 and the right horizontal post of the main line the target is 100 yards away. If the same target fits between the 2 and the right post of main line the target is 200 yards away. The same is with the three, the target is 300 yards away.

ARIES350/6800/7800 RETICLE

A 6’ target fits between the numbered baseline and the main horizontal line. If the 6’ target fits between the 2 and the right horizontal post of the main line the target is 200 yards away. If the same target fits between the 5 and the right post of main line the arget is 500 yards away. The same is with the 1,3 and 4.The target would be either 100,300 and 400 yards away.

The vertical lines in chevron reticle are propor- tioned to help in rangefinding and in making allowances for wind or movement.

If a 6’ target fits

between these two lines then the target is 100 yards away.

If a 6’ target fits

between these two lines then the target is 200 yards away.

If a 6’ target fits	If a 6’ target fits
between these two	between these two
lines then the target	lines then the target
is 500 yards away.	is 200 yards away.

7800c, 330, 6800c, 350c specifications

ATN is a well-known brand in the field of night vision and thermal imaging technologies. Among its notable products are the ATN 330, 350c, 7800c, and 6800c, each designed to meet the needs of various users, from recreational outdoor enthusiasts to professional hunters and tactical operators.

The ATN 330 is a compact and lightweight thermal imaging scope designed for user-friendly operation. It features a high-resolution thermal sensor, providing clear imagery in total darkness, as well as through smoke, fog, or rain. The device boasts an easy-to-use interface, allowing users to quickly adjust settings for optimal performance. Additionally, the ATN 330 offers a variety of reticles and image enhancements, making it versatile for different shooting scenarios.

The ATN 350c takes thermal imaging to the next level with its advanced features. It includes a built-in video recorder which allows users to capture their experiences and analyze them later. The 350c comes with Wi-Fi connectivity, enabling users to stream their footage live to a phone or tablet. This model is designed for those looking to share their experiences in real-time. Furthermore, the device supports multiple reticles and has customizable color palettes, enhancing the user experience.

The ATN 7800c is known for its high-definition features. This scope integrates both night vision and thermal imaging, offering users unparalleled versatility. The 7800c includes a dual-core processor which ensures fast image processing and smooth performance. Its built-in GPS allows for precise location tracking, while the firmware is upgradeable, meaning users can keep up with the latest technologies. The device is also equipped with a powerful zoom, making it suitable for long-distance shooting.

Lastly, the ATN 6800c is another premium model, distinguished by its large objective lens that gathers more light, resulting in excellent clarity and detail even in low-light environments. This device incorporates an easy-to-use ballistic calculator, allowing shooters to make precise adjustments based on environmental conditions. The 6800c also offers a highly durable design, making it resistant to varied weather conditions, and is equipped with a long-lasting battery for extended use.

In conclusion, ATN’s 330, 350c, 7800c, and 6800c night vision and thermal imaging devices stand out in their respective categories due to their innovative features, advanced technologies, and user-friendly designs. These models cater to a broad range of users, ensuring that whether for recreation or professional-grade applications, there is an ATN product to meet their needs.