Bushnell 11-8321 manual Press Snap to capture

Page 4

5.The mode setting operation is a cycle loop, so press the MODE button to switch to another mode. The loop order of the different modes is shown here:

6.To change settings, toggle through the different modes by pressing the MODE button. When a mode is selected, the indicator symbol on the LCD will appear. You can then select that mode by pressing the SNAP button.

7.When in “Normal” mode, press SNAP to take a picture.

Press SNAP->

8.Pressing the MODE button will cause the camera to enter “Mode Change”.

9.To select “Self-Timer” mode, press MODE and the self timer mark appears. Press SNAP and the capture will be done after 10 seconds. The camera exits self timer mode automatically after the capture is done and the self timer mark disappears on the LCD at the same time.

Press MODE->

press SNAP to capture.

4

Image 4
Contents Model LIT. # 98-0333/11-03 Camera Operation Instructions Button DescriptionsLCD Display Operation GuidePress Snap to capture Pixels resolution Image quality Captured Picture Quantity Captured Pictures with BUILT-IN MemoryPage Page Downloading the Pictures to Your Computer Connecting to the Computer System Requirements Software InstallationEYE Adjustments Figure Binocular InstructionsFocusing Eyecups FigureCleaning Instructions for Care of BinocularsWarranty / Repair TWO-YEAR Limited WarrantyPage Page Bushnell Performance Optics