For Future Reference

Mounting

The Compact Theater One LR and SR speakers can be mounted in a variety of ways:

On speaker stands Atlantic Technology speaker stands provide an ideal height (29" above the floor) for most rooms. They are available in black or white. Speaker stands from other manufacturers may be used, but should be of approximately the same height (29" to the base of the speaker). Threaded inserts on the backs of the speakers allow for secure mounting on stands designed for these types of connections.

On the wall To mount your speakers on a wall, we have installed metal key-hole brackets on the back of the LR and SR speakers. Be sure to use a strong screw whose head and shaft will fit within the keyhole opening and slot. Also be sure to drive the screw well into a stud or use a mounting device (such as a molly-bolt) that is capable of holding the weight of the speaker. Never simply drive a nail or screw into a sheet rock or other wall materials. Always follow the above guidelines for safe speaker mounting.

The threaded 1/4" x 20 insert located on the back of the SR and LR enclosures can also be used to mount the speakers to a wall using any commonly available “ball joint” style mount that includes 1/4" x 20 mounting hardware. Be sure to use a mount that will hold the weight of the speaker and follow all the manufacturer’s directions concerning appropriate hardware and mounting methods.

IMPORTANT! – Listening Levels and Power Handling

The power recommendation for these speakers assumes that you will not operate your amplifier/receiver in a way that produces high levels of distortion. A moderately powered amplifier driven beyond its intended capacity can and will damage even rugged speakers like the Compact Theater One system. This type of damage is easily identifiable through examination of the damaged speaker’s voice coil and is not covered by the warranty.

The Compact Theater One System will play very loudly when provided with enough clean power to do so. Again, consult your dealer or Atlantic Technology for additional information.

Care and Feeding of Your Speakers

Clean your speaker cabinets using a soft cloth moistened with a mild, non-abrasive glass cleaner being careful not to wet the edges of the cabinet. Also, be careful not to get any cleaning fluids on the driver cones or domes. It may be best to dampen the cloth with the cleaner and then wipe the speakers. Brush the non-removable grilles with a clean soft brush or a lint free cloth to clean them. Do not use a vacuum, as the combination of hard vacuum attachments and suction are likely to cause damage to the drivers.

Avoid placing your speakers in direct sunlight or near a source of heat that may, over time, damage the finish.

Important: SaveYour Boxes! If you can do so, save the cartons, packing pieces, and plastic bags that came with your speakers.They will be useful in case you move or have to ship your loudspeakers for any reason. In any case, save all packing materials until you are certain that the systems have suffered no damage in shipment. If you find such damage, either visible or internal, contact your dealer immediately for the proper return procedure.

Compact Theater System One Specifications

Model	System One LR Front Channel Speaker
Type	Sealed-box, 2-way
Drivers	5-1/4” Poly Composite woofer
Frequency Response (±3dB)	3/4” Mylar tweeter
Frequency Response (±3dB)	85Hz – 20kHz
Nominal Impedance	8Ω
Crossover Frequency	4kHz
Sensitivity	88dB
Recommended Amplifier Power	10 – 100 Watts
Magnetic Shielding	Yes
Size (W x H x D)	6-3/4” x 9-3/4” x 5-5/8”
Weight (ea., unpacked)	6.5lbs; 2.94kg

Model	System One C Center Channel Speaker
Type	2-way
Drivers	4” Poly Composite Woofer
	4” Poly Composite Passive Radiator
Frequency Response (±3dB)	3/4” Mylar Tweeter
Frequency Response (±3dB)	100Hz – 20kHz
Nominal Impedance	8Ω
Crossover Frequency	3.5kHz
Sensitivity	88dB
Recommended Amplifier Power	10 – 100 Watts
Magnetic Shielding	Yes
Size (W x H x D)	12-3/8” x 6” x 5-3/4”
Weight (ea., unpacked)	7lbs; 3.17kg

Model	System One SR Surround Speaker
Type	Sealed-box, surround speaker
Drivers	5-1/4” Poly Composite woofer
Frequency Response (±3dB)	3/4” Mylar Tweeter
Frequency Response (±3dB)	100Hz – 20kHz
Nominal Impedance	8Ω
Crossover Frequency	4kHz
Sensitivity	88dB
Recommended Amplifier Power	10 – 100 Watts
Magnetic Shielding	No
Size (W x H x D)	6-3/4” x 9-3/4” x 5-5/8”
Weight (ea., unpacked)	6.5lbs; 2.94kg

Specifications are those in effect at the time of printing. Atlantic Technology reserves the right to change specifications or appearance at any time without notice.

Dolby Digital, AC-3, 5.1, Dolby Stereo and Dolby Pro Logic are trademarks of Dolby Laboratories Licensing Corporation. DTS is a registered trademark of DTS Technology.

Record your system serial number and date of purchase here:

Serial Number

Date of Purchase

The serial number is found on the back of the center channel speaker near the connecting terminals.

010-1115

High Performance Compact specifications

The Atlantic Technology High Performance Compact (HPC) is a cutting-edge audio solution designed for discerning audiophiles and casual listeners alike. Engineered to deliver pristine sound quality in a compact format, the HPC series redefines what can be expected from a small speaker system, blending advanced technology with sleek design.

One of the standout features of the Atlantic Technology HPC is its extraordinary sound performance. The speakers utilize a specially designed driver configuration that ensures a wide frequency response, from deep bass notes to crisp highs. This technology allows for an immersive listening experience, making it ideal for music, movies, and gaming.

The HPC series also employs advanced crossover technology, which ensures that each driver operates within its optimal frequency range. This results in superior clarity and coherence, allowing listeners to appreciate the nuances in their favorite tracks or film soundtracks. In addition to the premium driver design, the speakers incorporate high-quality materials that enhance durability while maintaining sound fidelity.

Another defining characteristic of the Atlantic Technology HPC is its compact footprint. Measuring much smaller than traditional speaker systems, the HPC is perfect for environments where space is at a premium. However, this downsizing does not come at the cost of performance; on the contrary, the technology used in the HPC enables it to produce sound levels typically associated with larger, bulkier systems.

The aesthetics of the HPC series are equally impressive. With a modern design that fits seamlessly into any décor, these speakers can be effortlessly integrated into home theaters, audio setups, or even as standalone units. The finish options range from sleek black to elegant wood veneer, catering to various styles and preferences.

Furthermore, the Atlantic Technology HPC is designed with versatility in mind. They can be used in a variety of configurations, whether as part of a surround sound system or as standalone speakers for smaller spaces. The flexibility in setup allows users to personalize their audio experience according to their specific needs and preferences.

In conclusion, the Atlantic Technology High Performance Compact speakers embody a fusion of premium sound quality, innovative technologies, and design elegance. Whether for critical listening or casual enjoyment, the HPC series stands out as a remarkable choice for anyone seeking high-fidelity sound in a compact form.