Sharp HT-SL50 operation manual Specifications, Soundbar speaker

Specifications

As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production unit. There maybe some deviations from these values in individual unit.

General

Power source	AC 120 V ~ 60 Hz
Power	25 W
consumption
Output power	RMS: Total 100 watts
	RMS:
	Front Left/Right:
	25 watts per channel into 4 ohms at
	1 kHz, 10% total harmonic distortion
	Subwoofer:
	50 watts per channel into 8 ohms at
	100 Hz, 10% total harmonic distortion
	FTC:
	Front:(Left/Right):
	Minimum 24 watts per channel into
	4 ohms at 200 Hz to 20 kHz, 1% total
	harmonic distortion
	Subwoofer:
	Minimum 50 watts per channel into
	8 ohms at 100 Hz, 1% total harmonic
	distortion
Output	HDMI™ output: (audio/video support to
terminal	1080p) x 1
Input	Analog input (Audio in):
terminal	Stereo mini jack Ø 3.5 mm
	HDMI input: (audio/ video support to
	1080p) x 1

Soundbar speaker

Type	Full Range speaker system
	7/8" x 4-1/2" (2.2 x 11.5 cm)
	Full Range
Maximum	50 W/CH
input power
Rated input	25 W/CH
power
Impedance	4 ohms/CH (3 pieces parallel)
Dimensions	Width: 31-1/2" (801 mm)
	Height: 1-1/16" (26 mm)
	Depth: 2" (50 mm)
Weight	1.46 lbs. (0.66 kg)

Subwoofer

Type	Subwoofer system
	6 - 5/16" (16 cm) woofer
Maximum	100 W
input power
Rated input	50 W
power
Impedance	8 ohms
Dimensions	Width: 4 - 1/2" (115 mm)
	Height: 16 - 5/8" (422 mm)
	Depth: 12 - 1/16" (307 mm)
Weight	9.92 lbs. (4.50 kg)

E-15