Atlas Sound AH94-12ST, AH99-8ST, AH66-8ST, AH94-8ST manual Installation Via Mounting Bracket Included

Page 4

©2012 Atlas Sound L.P. All rights reserved. Atlas Sound is a trademark of Atlas Sound L.P. All other trademarks are the property of their respective owners. All specs are subject to change without notice. ATS004338 RevA 5/12

4/11

AH Series Loudspeakers

8", 12", and 15"

Installation Via Mounting Bracket (Included)

General considerations and hardware recommendations

CAUTION: AH series models weigh as much as 81 pounds (36.7kg) – model AH5040CD. A fall from almost any height could result in serious injury or death. Assure that the speaker is firmly mounted to an object that can handle the weight of the AH speaker. Remember that wind will add considerable torque to the point of attachment. The mounting surface the AH speaker is being attached to should be able to handle five or more times the weight of the AH speaker (7x recommended for locations subject to high wind forces).

Whenever the loudspeaker is mounted to a surface using the bracket, the installer must ensure that the surface is capable of safely and securely supporting the load. The hardware employed must be safely and securely attached both to the loudspeaker and the surface in question, using only the mounting holes. A general rule for soft surface installations (wood beams) is to multiply the corresponding working load limit by 75%; the result will be an approximate working load strength.

Use thread locking compound for all installations.

CAUTION: Mount the speaker such that the shear force is at a right angle to the mounting bolts, and close to the connection, as shown:

TENSION FORCE

Lock Washer

SHEAR FORCE

 

 

 

 

 

 

 

 

Flat Washer

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

When mounting the AH speaker to a solid surface use the proper bolts, washers, and lock washers (Grade 5 minimum). Do not substitute mismatched bolts and washers.

The AH speaker may be mounted to a pole or scoreboard. For such mounting, contact the light pole or scoreboard manufacturer for proper instructions. If mounting to another surface, such as a beam, see the diagram on page seven for mounting hole locations. When in doubt contact a qualified structural/mechanical engineer for approval of the mounting materials and methods.

1601 JACK MCKAY BLVD.

TELEPHONE: (800) 876-3333

AtlasSound.com

ENNIS, TEXAS 75119 U.S.A.

FAX (800) 765-3435

 

Image 4
Contents AH Series Loudspeakers Safety Instructions Hearing Damage Suspension & Mounting50˚ Installation Via Mounting Bracket Included Mounting Suspended Installation Via Eyebolts Included Using 1⁄4 Diameter Wire RopeSpeaker Cable Recommendations And Connection Instructions Amplifier Considerations Specifications Polestar Polestar
Related manuals
Manual 12 pages 9.85 Kb Manual 4 pages 9.39 Kb Manual 4 pages 31.16 Kb Manual 4 pages 24.72 Kb Manual 4 pages 43.12 Kb Manual 4 pages 61.64 Kb

AH9040S, AH99-12ST, AH66-12ST, AH99-8ST, AH94-8ST specifications

The Atlas Sound AH6565S is a robust and versatile loudspeaker specifically designed for a range of professional audio applications. This model is well-regarded in the audio industry for its blend of high performance and dependable features, making it a preferred choice for installations in venues such as schools, auditoriums, conference rooms, and houses of worship.

One of the standout features of the AH6565S is its superior sound reproduction capabilities. It is equipped with a 6.5-inch woofer and a 1-inch dome tweeter, delivering clear and balanced sound across a broad frequency range. This speaker is designed to provide exceptional clarity for both vocals and instruments, ensuring that every note and nuance is reproduced faithfully.

The AH6565S also showcases advanced technology in its construction. With a power handling capacity of up to 100 watts, it can handle the demands of high-volume settings without distortion, making it suitable for both music and speech applications. Additionally, the speaker’s sensitivity rating of 90 dB ensures that it can produce a high output even with lower power input, optimizing efficiency in audio settings.

Durability is a key aspect of the AH6565S design. It features a rugged and weather-resistant enclosure that allows for both indoor and outdoor use, making it a versatile addition to any sound system. The cabinet is constructed to minimize resonance and unwanted noise, which contributes to the overall audio quality.

Installation is made easy with the AH6565S, as it includes a variety of mounting options. Its versatile design allows for both horizontal and vertical placement, accommodating diverse installation environments. The speaker also integrates seamlessly with existing audio setups, thanks to its standard 70/100-volt transformer, which makes it compatible with distributed audio systems.

In addition to its technical specifications, the Atlas Sound AH6565S is also aesthetically appealing. Its sleek design and neutral finish allow it to blend into various settings while still offering functional performance.

Overall, the Atlas Sound AH6565S stands out as a reliable choice for professionals seeking excellent sound quality, durability, and flexible installation options in a speaker system. Whether used in educational, corporate, or entertainment venues, it demonstrates exceptional performance that ensures clear audio delivery in any environment.