Stamina Products 15-0200A owner manual Seat FRAME5

Page 7

ASSEMBLY INSTRUCTIONS

Peg

STEP 4

Attach the SEAT(43) to the SEAT FRAME(5) with HEX BOLTS(M8x1.25x20mm)(64) and WASHERS(M8) (75). Pull the ADJUSTMENT KNOB(41), then insert the SEAT FRAME(5) into the MAIN FRAME(1) and secure with the ADJUSTMENT KNOB(41).

NOTE: 1. It may be necessary to unscrew the ADJUSTMENT KNOB(41) slightly to insert the SEAT FRAME(5).

2.Make sure that the pin on the ADJUSTMENT KNOB(41) is inserted into one of the holes in the

SEAT FRAME(5).

3.The ADJUSTMENT KNOB(41) should be screwed in tight to make the SEAT FRAME(5) fit securely in the MAIN FRAME(1).

STEP 5

Attach the BACK SUPPORT(6) to the SEAT FRAME(5) by sliding the slots in the end of the BACK SUPPORT(6) onto the pegs on the SEAT FRAME(5) and securing with CARRIAGE BOLT(M8x1.25x85mm) (57), SPACER(80) ,WASHER(M8)(75), and the LOCKING KNOB(45).

STEP 6

Attach the HANDRAIL(7) to the SEAT FRAME(5) with HEX BOLTS(M8x1.25x40mm)(65) and ARC

WASHERS(M8)(74).

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Stamina Products Weight on this product should not exceed 250 lbsSafety Instructions Table of ContentsCall US First Intone Folding Recumbent Bike Before YOU BeginHardware Identification Chart Step Assembly InstructionsSeat FRAME5 Assembly Instructions Function Inspection SET UP InstructionsFunctions Operational Instructions Using the Electronic MeterHOW to Install and Replace Batteries Function ButtonsLoad Adjustment Operational Instructions Seat AdjustmentMaintenance Storage Target Heart Rate Zone Estimated by Age Conditioning GuidelinesWARM-UP and COOL-DOWN Warranty Limited WarrantyFront Product Parts DrawingPart Name Parts ListParts List Stamina Products, Inc Box Springfield, MO FAX/MAIL Ordering Form
Top Page Image Contents