ASSEMBLY INSTRUCTIONS
Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all packing materials from your area and place them back into the box. Do not dispose of the packing materials until assembly is completed. Read each step carefully before beginning. If you are missing a part, please go to staminaproducts.com under the Service section and order the part needed,
STEP 1
Refer to the illustration below. Position the REAR STABILIZER(8) with the flange plates facing out, then attach it to the MAIN FRAME(1) with BUTTON HEAD BOLTS(M10x1.5x15mm)(15) and ARC
WASHERS(M10)(16).
STEP 2
Attach the FRONT STABILIZER(7) with the flange plates facing out to the MAIN FRAME(1) with BUTTON HEAD BOLTS(M10x1.5x15mm)(15) and ARC WASHERS(M10)(16).
15
FRONT
16
15
16
8
Flanage Plates
face out.
REAR
15 16
17
15
16
7