Sears 831.297662 user manual Operation Adjustment, Performant Lube TM Walking Belt

Page 7

OPERATION

AND ADJUSTMENT

 

 

 

THE PERFORMANT

LUBE TM WALKING

BELT

electric shock. This product is equipped with a cord

 

 

 

 

 

 

 

 

 

having an equipment-grounding conductor and a

Your treadmill

features

a walking belt coated with

grounding plug. Plug the power

cord into a surge

PERFORMANT

LUBE TM, a high-performance

lubricant.

protector,

and plug the surge

protector

Into an ap-

IMPORTANT:

Never

apply

silicone spray or other

propriate

outlet that is properly Installed

and

substances

to the walking

belt

or the

walking plat-

grounded

In accordance with all local codes and

form.

They

will deteriorate

the

walking

belt

and

ordinances.

 

 

cause

excessive wear,

 

 

 

 

 

 

 

 

This product is for use on a nominal 120-volt circuit,

HOW TO PLUG IN THE POWER CORDand has a grounding plug that looks like the plug illus- trated in drawing 1 below. A temporary adapter that looks like the adapter illustrated in drawing 2 may be used to connect the surge protector to a 2-pole recep-

tacle as shown in drawing 2 if a properly grounded out- let is not available.

The temporary adapter should be used only until a

 

 

properly grounded outlet (drawing 1) can be installed

 

 

by a qualified electrician.

 

 

The green-colored rigid ear, lug, or the like extending

 

 

from the adapter must be connected to a permanent

 

 

ground such as a properly grounded outlet box cover.

Your treadmill, like any other type of sophisticated

Whenever the adapter is used it must be held in place

by a metal screw. Some 2-polereceptacle outlet box

electronic equipment, can be seriously damaged by

covers are not grounded. Contact a qualified elec-

sudden voltage changes in your home'spower.

trician to determine if the outlet box cover Is

Voltage surges, spikes, and noise interference can re-

grounded before using an adapter.

suit from weather conditions or from other appliances

 

 

being tumed on or off.

 

 

 

To decrease the pos-

 

 

 

sibility of your tread-

1

 

 

mill being damaged,

/Grounded Outlet Box

Treadmill

 

 

always use a surge

 

 

 

protector (not In-

._ Grounding Pin

 

cluded) with your

 

 

 

treadmill.

Grounding

 

Surge protectors are sold at most hardware

stores and department stores. Use only a UL- listed surge protector, rated at 15 amps, with a 14-gauge cord of five feet or less in length.

'__undingPlug

3rounded Outlet

This product must be

grounded. If it shouldSurge Protector malfunction or break

down, grounding pro-

vides a path of least re- sistance for electric cur-

rent to reduce the risk of

7

Image 7
Contents SEARS, Roebuck and CO., Hoffman ESTATES, IL HelplineContents Important PrecautionsWarhihg Front Before YOU BeginBack Assembly Page Performant Lube TM Walking Belt Operation AdjustmentPerformant Step by Step Console Operation Diagram of the ConsoleCALORIES/PULSE ST,,ceHOW to Fold the Treadmill for Storage HOW to Fold and Move the TreadmillHOW to Lower the Treadmill for USE HOW to Move the TreadmillSymptom the Walking Belt is OFF-CENTER When Walked on Symptom the Power does not Turn onSymptom the Power Turns OFF During USE Symptom the Walking Belt Slows When Walked onSymptom the Treadmill Sits Unevenly on the Floor Exercise Intensity Conditioning GuidelinesWorkout Guidelines Suggested Stretches Cool-down Exercise FrequencyRemove HIS Exploded Drawing and PAR List from HE Manual EXPLODEDDRAWINGmModelNO.831.297662 Ro97A lol NSP Part LISTmModel Ros97ASEARS, Roebuck and CO., Dept WA, Hoffman ESTATES, IL Full 90 DAY Warranty