Coaxial Cable Installation Precautions

If your TV has a 75 ohm VHF connection and a 300 ohm UHF connection, connect a signal splitter, not supplied, between the power injector and the TV’s VHF/UHF connections.

Coaxial Cable Installation Precautions

•Do not bend coaxial cable into less than a 3 inch radius. Tighter bends can cause shorts and change the cable’s impedance.

•Do not install coaxial cable where it will have a pulling tension greater than 50 pounds maximum. Leave no tension on the cable after installing it.

•Use only round headed staples. Any clamps or securing devices used with coax should grip the cable evenly about the circumference without crushing the cable. Flat staples can damage coax cable.

•Do not expose coaxial cable to a temperature greater than 176° (80°C). Keep the cable away from heating vents and water heaters.

•The cable jacket withstands most outdoor environments. However, you must seal connections and splices against water entry.

Specifications

Bandpass:
VHF		58-88,170-216 MHZ
UHF		470-810 MHz
FM Trap (Fixed)		88-108 MHz
VHF/UHF Gain		20 dB Average
Impedance		75 Ohms, Unbalanced
Power Requirement		12V DC 120 VAC, 60 HZ
		(with supplied adaptor)
Weatherproof Housing		UV Protected Filled Copolymer
Mounting	11/2 Inch Outer Diameter Round Mast

Specifications are typical. Individual Units might vary. Specifications are subject to change and improvement without notice.

ANT2020X specifications

The RCA ANT2020X is an innovative antenna designed to enhance your television viewing experience by providing exceptional reception without the need for a cable subscription. This compact, indoor antenna is part of RCA's commitment to delivering high-quality, user-friendly products that cater to the needs of modern consumers seeking to cut the cord.

One of the main features of the RCA ANT2020X is its impressive 60-mile range. This allows users to access a variety of high-definition channels available in their area, including local broadcasts and more. This extended range is particularly beneficial in urban and suburban settings, where signal interference can impact performance. The antenna is engineered to pick up signals from multiple directions, ensuring that you capture the best possible reception regardless of your location.

The ANT2020X is designed with advanced technology, including an integrated amplifier. This built-in amplifier boosts signal strength, providing clearer picture quality and fewer interruptions, even in areas with weak signals. The amplifier is powered through a USB connection, making it easy to set up without the need for additional batteries or power sources. It also features a simple on/off switch, allowing users to easily toggle the amplifier based on their needs.

Aesthetically, the RCA ANT2020X stands out with its sleek and modern design. The antenna is lightweight and slim, allowing for easy placement in various locations, whether on a shelf, wall-mounted, or tucked behind a TV. Its discreet appearance ensures that it will blend seamlessly into any home décor. The included 10-foot coaxial cable provides flexibility in positioning the antenna for optimal performance.

The setup process for the RCA ANT2020X is straightforward, making it accessible for users of all tech-savviness levels. Simply connect the antenna to your TV, scan for channels, and enjoy a host of free programming. With no monthly fees and no contracts involved, the RCA ANT2020X provides a cost-effective solution for access to high-quality entertainment.

In conclusion, the RCA ANT2020X is an excellent choice for those looking to enhance their television experience while saving money. Its impressive range, built-in amplification, stylish design, and user-friendly setup make it a standout option in the competitive antenna market. This product exemplifies the perfect blend of technology and design, ensuring that you can enjoy your favorite shows without the hassle and expense of traditional cable.