Figure C
Instructions for guying out your tent using
1.Feed cord through cord cleat and secure as per Figure A below. When complete, assembly will appear as in Figure B.
Figure A | Figure B |
2.To tension the cord, slide the cleat
towards the tent (Figure C).
to tent
to anchor
3.To release tension, pull the cords
apart (Figure D).
Figure D
Use your internal guy system for extreme weather conditions and high winds. The internal guy system consists of pieces of cord (96” long) and cord cleats (Figure 11). As the wind increas- es, increase the tension by tightening the cord cleats.
Figure 11