75270 rev2 22/4/08 10:40 Page 6
B
HOW TO USE
1Ensure the blanket is fitted to the bed correctly, see diagram A.
2Plug the power lead into the closest socket, using an extension lead, if needed, to ensure that the lead is not stretched.
Preheating the bed
Move the heat setting on the control switch to heat level 2 or 3, depending on the level of the heat required. Allow approximately
All night use
NOTE: Blankets are perfectly safe to be used all night. However, we recommend using the heat setting below.
•Move the heat setting on the control switch to heat level 1.
•This setting will provide safe and comfortable heat to sleep on all night.
•This setting can be used to air the bed.
WARNING: Always ensure that the heat setting is moved to the OFF position when you get up the next day, or after airing the bed.
WASHING
INSTRUCTIONS
WARNING:
•Do NOT dry clean -
•Do NOT iron -
WARNING: Before washing, ensure that you detach all the controls from the blanket.
•Only use a washing machine with a drum large enough to take the blanket without forcing it in.
•Measure the blanket so it can be stretched back to it’s original size whilst wet.
NOTE: Please ensure washable models are fully dry before use.
Machine washing 40º
1Unplug the blanket from the power socket.
2Disconnect the control switch and cord from the blanket by lifting the locking lever over the raised button and pulling apart B.
3Wash on the wool setting at 40°C.
4Gently stretch the blanket back to it’s original shape and size before drying, without applying clothes pegs to wired areas of the blanket (see instructions for tumble drying, below).
Tumble drying
1Unplug the blanket from the power socket.
2Disconnect the control switch and cord from the blanket by lifting the locking lever over the raised button and pulling apart B.
3Tumble dry on the LOW heat setting, following the drying instructions under the ‘Machine washing’ section, point 4.
6 | UK Helpline 0844 871 0948 | Ireland Helpline 1800 409 119 |