Setting the timer

75263 rev1 9/3/07 09:04 Page 9

1Move the slider to timer position.

2The start and timer symbols will appear plus the hour will flash. Use the up and down buttons to select the required start time ensuring its on the correct AM

or PM. When desired hour is selected press mode button F.

3Then the minutes will start to flash, select the desired start time (this setting adjusts in 15 minute steps) When selected press mode button.

4Timer and finish will appear. plus the hour will flash. Use the up button to select required finish time ensuring its on correct AM or PM. When correct hour is selected press mode.Then the minutes will start to flash, select required time. Then press mode

button (this setting adjusts in 15 minute steps) G.

5The heat level will start to flash use the up and down arrows to select required heat level. Press mode button. The pre-heat symbol will flash. If this is required, then press mode button (if not required then press down arrow button before the mode button)

NOTE: The pre-heat feature will pre-heat the bed at high level (H) for the first 30 minutes of

programed time before reverting to the selected heat level H.

The clock symbol will then appear indicating that the timer function is set.

6Once the timer function is set. The programme details are stored in memory.

If left in timer mode the blanket will automatically switch On and OFF at the set time each day.

7The programmed time is stored even when switch is moved to the OFF position.

To use stored programme simply move slide switch to timer position.

8To change the programme move slide to timer position and press mode button and repeat steps 1-5.

Safety features

Button lock feature

Press mode then boost to lock the buttons. To unlock press mode then boost. This will prevent accidental operation while asleep. When the lock is activated. The LOCK symbol will appear on the LCD screen I.

UK Helpline 0870 060 2614 Ireland Helpline 1800 409119