Fuse replacement (220V system only)
tool needed: small screwdriver
1.If you suspect a blown fuse, disconnect the plug from the wall outlet immediately.
fuse
fuse cover
fuse location
2.Use a small screwdriver to remove the cover of the fuse holder (fuse locations are shown in picture above).
3.Insert a new fuse of the correct rating (T1A/250V).
4.Replace the fuse holder cover. Ensure that fuse holder cover is securely installed.
STORAGE
1.Fold the bubble pad loosely.
2.Store bubble pad and pump in a
| 13 |