6.Attach the two remaining hooks on the top of the tent to the Center Support Post. (Fig. 6)
7.Attach hooks on the corners of the tent to the Gold End Poles; then the hooks on the front & back of the tent to the Chrome Center Poles. (Fig. 6)
8. Stretch corners and front & back of tent until floor is taut; then hammer stakes through loops on web straps to secure. (Fig. 6)
Bedroom | Screened Living |
Area | Area |
Stake through loop in six web straps on tent
FIG. 6
9. Unfold Rainfly and pull it over the tent frame. (Fig. 7)
NOTE: The windows need to be placed over the Bedroom Area and the right and left side awning flaps need to be positioned over the Screen Living Area.
Plastic Window | Awning Flap |
FIG. 7
10.Unzip all Awning Flaps and Doors on the Rainfly.
11.Locate all 34 hook and loop fasteners, on under side of Rainfly, and wrap around all Gold and Chrome Leg Poles to secure. (Fig. 8)
IMPORTANT: All hook and loop fasteners must be secured to provide more stability in windy conditions.
Hook & Loop |
Fastener |
FIG. 8 |
12.Insert plastic locking tabs, located on corners and front & back of Rainfly, into plastic sleeves on web straps of tent. (Detail C)
13. Extend out guylines on front, back, and sides of tent and stake to secure Rainfly and tent (Fig. 9)
NOTE: Make sure guylines, located on left and right side of the Rainfly Awning Flap, do not interfere with access to the doors of tent.
Awning Flap
Plastic | Guyline |
Locking |
|
Tab |
|
| FIG. 9 |
Plastic | The X8 tent assembly is complete. Proceed to the Tent Configuration |
Sleeve | Section, on page 6, for the variety of ventilation options available with |
| |
Detail C | your tent for its enjoyment in any weather condition. |
4 | 5 |