3 Attach Tent to Frame Using Frame Clips
–Attach frame clips along
the edges of tent to frame poles. (illus. 5), (illus. 6)
–Make any adjustments to the tent corner stakes that are needed.
illus. 5
Frame clips
illus. 6
Assembled tent without rainfly.
4 Attach Rainfly
– Assemble rainfly pole by interlocking
– Insert rainfly pole into reinforced pockets located at the center edges of the underside of rainfly.
(illus. 7), (illus. 8)
– Attach underside of rainfly to the rainfly pole. (illus. 8)
– Drape rainfly over tent frame, pole side down. Rainfly pole should point out over door and rear window.
– Connect the four elastic loops with “S” hooks, (found at the rainfly corners) to the four rings at the corners of the tent.
– Secure rainfly with attachments located on underside of fly. (illus. 9)
– Stake out the tent with (2) side guylines. (illus. 9)
Rainfly pole pocket
Pole attachments
illus. 7 Insert rainfly pole into pocket on underside of rainfly
illus. 8
Rainfly pole pockets
Underside of rainfly attaches to frame poles
illus. 9 | Side guyline | |
Completed tent with rainfly. | ||
Stake down doormat | ||
|
Things You Should Know
•Under certain conditions (cold weather, high humidity, etc.) condensation will form on the inside surfaces of your tent. Condensation is caused by water vapor from your breath, perspiration, or any wet clothing inside your tent. It is NOT LEAKAGE through the tent fabric. It can be minimized by removing wet clothing from your tent and by providing good ventilation through the tent.
•Never store tent, even for a short period of time, without drying it thoroughly and brushing off caked dirt. Do not pack stakes or poles inside your tent. Use a separate storage bag.
•STAKES SHOULD BE REMOVED BY PULLING ON THE STAKE ITSELF. NEVER PULL ON THE TENT FABRIC OR TENT STAKE LOOP
TO REMOVE STAKE.
•TENT POLES SHOULD NOT BE LEFT TELESCOPED
TOGETHER DURING STORAGE.
•Do not leave your tent
WARNING: KEEP ALL FLAME AND HEAT SOURCES AWAY FROM THIS TENT FABRIC. This tent meets the flammability requirements of
THE COLEMAN CO., INC.
3600 N. Hydraulic • Wichita, Kansas 67219
PRINTED IN VIETNAM Rev. 11/06
MADE IN VIETNAM