STITCH LINE
14’ EVENT SHADE MODEL 9391-144
Before you begin
Read all instructions before set up.
•Select a level site clear of rocks, branches, and other hard or sharp objects to install your shelter.
WARNING: Keep clear of overhead power lines.
•It is important to the stability and life of your shelter to have a secure mounting surface.
•Consult a local contractor for any local building code requirements.
•Enlist the help of at least one other person to assist you when it is time to assemble the shelter.
Parts and Components
To Set Up Shelter
1.Assemble Peak Pole with Center Hub. (Fig. 2)
Fig. 2
2. Assemble both Peak Connector Poles. (Fig.3)
Fig. 3
Description | Part Number |
Peak Pole w/Center Hub (1) | |
Peak Connector Poles (2) | |
Leg Pole w/Ridge Hub (4) | |
Pad Feet (4) | |
Canopy (1) |
|
3.Insert ends of the Peak Connector Poles marked with the arrows into the Peak Pole with Center Hub. (Fig. 4, 5 & 6)
Fig. 4
Center Hub
Fig. 5
Leg Pole w/Ridge Hub (4)
Peak Pole w/Center Hub (1)
Peak Connector Poles
Corner Locator
Pad Feet (4)
Fig. 6
4. Partially assemble the four Leg Poles with Ridge Hub. (Fig. 7) NOTE: Do not assemble the last pole on each side of the Ridge Hubs at
this time.
Important: All four Pad Feet of the Event Shade must be located 14 feet apart. For accurate placement, use the rings on the corner locator to mark locations (Fig. 1):
a)Place white ring on corner locator at point “A” and mark with a stake.
b)Extend rings “B” & “C” out to form a 90° angle amd mark both points with a stake. Distance between point “B” & “C” will measure 19’ 8”.
c)To locate corner “D”, unhook white ring from corner “A” and move diagonally as shown and mark.
d)Remove and stow corner locator for future use.
Fig. 1 |
Ridge Hub
Fig. 7
5.Insert end of Peak Connector Pole into Ridge Hub (Fig. 8 & 9). Repeat for the remaing three Leg Pole with Ridge Hubs. NOTE: Make sure
metal pin locks into | Metal Pin | Slot |
slot on top of Ridge |
| Peak Connector |
Hub, you may have to |
| Pole |
twist Peak Connector |
|
|
from side to side. |
| Fig. 8 |
Fig. 9
(continued on other side)