Attach Rainfly

3 Attach Tent to Frame Using Frame Clips

–Attach frame clips along

the edges of tent to frame poles. (illus. 6), (illus. 7)

–Make any adjustments to the tent corner stakes that are needed.

NOTE: Grommets for rainfly pole are on frame clip webbing

illus. 7

illus. 6

Frame clips

Assembled tent without rainfly.

4 –Assemble rainfly pole by	illus. 8 Insert rainfly
4 –Assemble rainfly pole by	poles through the
interlocking shock-corded pole.	pole sleeve on
–Insert rainfly pole through pole	pole sleeve on
–Insert rainfly pole through pole	underside of rainfly
sleeve at the center of the front	underside of rainfly
sleeve at the center of the front
curved edge on the underside of
rainfly. (illus. 8), (illus. 10)
–Drape rainfly over tent frame, pole		Rainfly pole
side down. Rainfly pole should be over		Rainfly pole
front door.		in grommet
–Connect the eight elastic loops with
hooks, (found at the rainfly corners)
to the eight fabric loops on the bottom
row of frame clips. (illus. 9), (illus. 10)
–Insert the tips of the rainfly poles
into the grommets on the front
of tent. (See above illus. 7)
–Secure rainfly with attachments
located on underside of fly.
(illus. 9)
–Attach and stake out 4 guy lines
at the front and rear of tent.
Guy line		illus. 10
Guy line		Completed tent
		Completed tent
		with rainfly.

Underside of rainfly attaches to frame poles

Hooks attaches

to fabric loop

illus. 9

Rainfly hooks attach to fabric loops on the corner frame clips (illus. 9)

Things You Should Know

•Under certain conditions (cold weather, high humidity, etc.) condensation will form on the inside surfaces of your tent. Condensation is caused by water vapor from your breath, perspiration, or any wet clothing inside your tent. It is NOT LEAKAGE through the tent fabric. It can be minimized by removing wet clothing from your tent and by providing good ventilation through the tent.

•Never store tent, even for a short period of time, without drying it thoroughly and brushing off caked dirt. Do not pack stakes or poles inside your tent. Use a separate storage bag.

•STAKES SHOULD BE REMOVED BY PULLING ON THE STAKE ITSELF. NEVER PULL ON THE TENT FABRIC OR TENT STAKE LOOP TO REMOVE STAKE.

•TENT POLES SHOULD NOT BE LEFT TELESCOPED

TOGETHER DURING STORAGE.

•Seam sealer has not been provided with your tent. For additional protection we recommend seam sealing your tent prior to camping. Seam sealer may be purchased through your local retailer or at your local sporting goods store.

PRINTED IN CHINA Rev. 11/05

•Do not leave your tent set-up for weeks at a time, be aware that expo- sure to the ultraviolet rays of the sun can seriously damage material and/or cause it to become discolored.

WARNING: KEEP ALL FLAME AND HEAT SOURCES

AWAY FROM THIS TENT FABRIC. This tent meets the flammabili- ty requirements of CPAI-84. The fabric will burn if left in continuous contact with any flame source. The application of any foreign sub- stance to the tent fabric may render the flame-resistant properties ineffective.

THE COLEMAN CO., INC.

3600 N. Hydraulic • Wichita, Kansas 67219

1-800-835-3278 • www.coleman.com

MADE IN CHINA

9277A151 specifications

The Coleman 9277A151 is a powerful and versatile camping lantern that has gained popularity among outdoor enthusiasts for its reliability and performance. This lantern is designed to provide bright illumination, making it an essential companion for camping trips, backyard gatherings, or emergency situations.

One of the standout features of the Coleman 9277A151 is its impressive brightness. With a maximum output of up to 1,000 lumens, this lantern can light up large areas, ensuring that you have adequate visibility in the darkest of environments. This makes it ideal not only for camping but also for activities such as fishing or late-night hikes.

The lantern operates using propane fuel, which is a significant advantage as it offers convenience and a long runtime. Users can enjoy continuous light for hours on a single tank. The easy-to-use fuel system allows for swift fuel replacement, making it perfect for extended outdoor adventures where electricity access is limited.

Another notable characteristic of the Coleman 9277A151 is its durable construction. Made with high-quality materials, this lantern is built to withstand the rigors of outdoor use. It is resistant to impacts and adverse weather conditions, ensuring that it can handle rough handling and varying climates. The sturdy design also makes it safe for use in both open-air and enclosed camping settings.

In terms of technology, the lantern features an adjustable brightness setting, allowing users to customize the light output according to their needs. Whether you require a soft glow for ambient lighting or a bright beam for detailed tasks, the Coleman 9277A151 has you covered. This versatility adds tremendous value for campers who wish to conserve fuel while also adapting to different scenarios.

The lantern is designed with user-friendliness in mind. It often includes a comfortable handle for easy transport, as well as a stable base to prevent tipping. This thoughtful design ensures that users can focus on enjoying their activities rather than worrying about their equipment.

In summary, the Coleman 9277A151 is a reliable, durable, and efficient camping lantern that offers outstanding performance in various outdoor situations. Its powerful brightness, propane fuel efficiency, and thoughtful design make it a worthy addition to any outdoor gear collection. Whether for camping, hiking, or emergency use, this lantern will illuminate your path and enhance your outdoor experiences.