COLEMAN® KEYSTONETM DOME
Instructions apply to Part Number 9270-121C
When You Are Ready
To Set Up Your Tent
–Select a level campsite clear of rocks, branches and other hard or sharp objects.
–Do not set up your tent under trees.
–For best results in windy conditions, position the end of tent into the wind.
POLE ASSEMBLY PARTS
(2) Main Tent Part No.
Poles
(1) Rainfly Part No.
Pole
Rainfly Part No.
1 Layout & Positioning of Tent, Pole Assembly
–Layout and position tent with door facing desired direction. (illus. 1)
–Unzip door.
–Stake down tent corners only, using the stake loops. (illus. 2) Keep the floor taut.
–Assemble Frame Poles by interlocking
–Insert the poles into Pole Sleeves. The poles should cross forming an “X” in the middle of tent. (illus. 1)
Assembled poles inserted through pole sleeves
illus. 1
2 Connect Frame to Tent
– Insert one end of main tent pole onto pin of ring and pin system, at tent corner. (illus. 3)
– Go to opposite end of pole and gradually apply pressure to the pole forming an arch until you are able to insert the pin into the pole.
– Repeat for second pole. (illus. 4)
illus. 4
Tent frame
illus. 2 Tent stake through ring
illus. 3
Insert pin into pole end