Coleman 2000000456 manual Phad X, Assemble Frame, Layout & Positioning, Rainfly, Pole Assembly

Page 1

 

Phad X2

 

part number 2000000456

POLE ASSEMBLY PARTS

 

Main Tent Poles (Silver)

Rainfly

Part No. 9830-1151

Part No. 9830-1371

Side Pole (Red)

 

Part No. 9830-1251

 

1 Layout & Positioning

Main Tent Poles

 

of Rainfly, Pole Assembly

Side Poles

– Layout and position Rainfly with doors facing

 

desired direction. (illus. 1) Unzip doors.

 

– For best results in windy conditions, position

 

back of tent into the wind.

 

– Stake down rear tent corners. (illus. 1)

 

– Assemble frame poles by interlocking the

 

shock-corded sections. This will make two

illus. 1

long silver Main Tent Poles and one red

 

Side Pole.

 

– Insert the cap end of the two Main Tent Poles

illus. 2

through the poles sleeves with the silver trim.

Tent stake

– Insert the cap end of the red Side Pole through

through Loop

the pole sleeve with the red trim.

 

Assemble Frame

Main Tent Poles

Side Poles

2 – Start with one of the Main Tent Poles and

 

gradually apply pressure to the pole,

 

forming an arch, until you are able to

 

insert the pole tip into the grommet on

 

the corner web. (illus. 4)

 

– Repeat for second pole.

 

– Go to the Side Pole and gradually apply

 

pressure to the pole, forming an arch,

 

until you are able to insert the pole

 

tip into the grommet. (illus. 4)

 

 

illus. 4

 

Tent frame up

 

illus. 3

 

Insert Pole Talon on

 

stake loop into pole.

Image 1
Contents Phad X Rainfly, Pole AssemblyAssemble Frame Layout & PositioningThings You Should Know Attach TentStake out rainfly doors, keep rainfly taut. illus