AudioSource 6.5" 2-Way In-Celing Speakers installation manual Way In-Ceiling Speakers, Placement

AS6c

6.5” 2-Way In-Ceiling Speakers

Congratulations on your purchase of the Audiource AS6c In-Ceiling Speaker System. This product is designed to reproduce the audio portion of your home entertainment environment with accuracy and detail that will satisfy the most discriminating listener.

Please read this Installation Manual to ensure the proper installation and performance of your AS6c speakers.

Preparing for your Installation

Gather the necessary tools for your installation.

You will need the following tools:

1)A Keyhole or Drywall Saw

2)A Phillips Screwdriver

3)Masking Tape

4)A Pencil

5)A Bubble or Laser Level

6)A Tape Measure

7)A Stud Finder (recommended)

8)Your AS6c speakers

Placement

Plan your speaker placement carefully. Make certain that electrical, plumbing and any other services will not interfere within the ceiling where you plan to place your speakers. The AS6c speakers can be mounted in the walls or in the ceiling, but are typically used in ceilings. The speakers should be located so that they provide even coverage at your listening position. The distance between the speakers should not be greater than the distance from the speakers to the listening position. (See Fig. 1) If the room’s dimensions or furniture placement prevent adhering to this requirement, the tweeters in the AS6c speakers can be swiveled to aim them at the desired listening position.

New Construction

If you are installing your speakers in new construction before the finished walls go up, AudioSource offers a Pre-Construction Bracket, Part NCBC6 that provides a stable frame that can be fastened to the wall studs or ceiling joists on 16” or 24” centers. This allows the sheetrock or other surface covering to be installed and clearly leave the opening for the AS6c speakers.

AS6c

Existing Construction

In most modern buildings the ceiling joists are positioned on 16” centers, providing a space between the joists of approximately 14 3/8”. The AS6c requires a mounting hole 7 3/4“ in diameter. Also, you should allow an extra 3/4” clearance in all directions behind the ceiling surface to allow room for the doglegs that retain the frame to the ceiling surface to swing into position.

Use a stud finder to locate the joists behind the ceiling surface. Also, you should now check for obstructions like cross bracing in front of and behind the desired speaker location.

11’

11.5’

20’

16’

Figure 1