- Seating Installation (cont.) -
Reach under the Rear Seat Bracket and slide the Latch Clip outwards and then up against the underside of the Support Tube. Squeeze the Latch Clip into the horizontal slot of the Rear Seat Bracket.
Secure the position of the Latch Clip by pushing it into the two holes located above the horizontal slot of the Rear Seat Bracket.
WARNING: ALWAYS KEEP THE LATCH CLIP IN THE SECURED POSITION DURING USE. FAILURE TO DO SO COULD RESULT IN INJURY FROM THE SEAT COMING OFF OF ITS MOUNTING SYSTEM.
Included is a Tow Rope for those not planning to install the optional Tow Hitch Assembly (available for purchase at www.clamcorp.com.). Two install the Tow Rope, drill two 1/2" holes in the sloped front of the Base. Knot the ends of the Tow Rope after routing through the drilled holes.
15