- Set-Up Instructions -
ŀ
ŀ
ŀ
Unfold the unit and unzip the doors at both ends. Locate and remove the folded Flexible Rods and Latch Clips from the unit.
Through the doorway of one end, grasp the center of the nearest Hoop Tube and pivot it upwards towards you into a vertical position. Next pull the same Hoop Tube straight up, sliding it until the holes near the ends are engaged by the Spring Buttons of the Canopy Poles. Lay the erected Hoop Tube down onto the unit.
Go around to the opposite doorway and erect the other Hoop Tube in the same fashion. Lay both erected Hoop Tubes against one another.
102190 Tent (not shown)
101682 Flexible Rod
102191 Hoop Tube
101168 Latch Clip
101152 Canopy Pole
Spring Button
101150 Hole Cover
101116 Molding
2